SAE AS5169A-2009
Fitting, Port Plug and Bleeder
Home
SAE AS5169A-2009
Standard No.
SAE AS5169A-2009
Release Date
2009
Published By
Society of Automotive Engineers (SAE)
Status
Be replaced
2019-04
Replace By
SAE AS5169B-2019
Latest
SAE AS5169C-2021
SAE AS5169A-2009 Referenced Document
ASME B46.1-2002
Surface texture (surface roughness, waviness, and lay)
*
,
2023-12-22 Update
ASME B46.1-2009
Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)
*
,
2023-12-22 Update
ASME Y14.36M-1996
Surface Texture Symbols
ASME Y14.5M-1994
Dimensioning and tolerancing
SAE AMS-QQ-A-225/6-1997
Aluminum Alloy@ 2024@ Bar@ Rod@ and Wire; Rolled@ Drawn@ or Cold Finished (UNS A92024)
SAE AMS-QQ-A-225/9-1997
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold finished
SAE AMS-QQ-P-416-2000
Plating@ Cadmium (Electrodeposited)
SAE AMS2486D-2004
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488D-2000
(R) Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AS5169A-2009 history
2021
SAE AS5169C-2021
FITTING, PORT PLUG AND BLEEDER
2019
SAE AS5169B-2019
Fitting, Port Plug and Bleeder
2009
SAE AS5169A-2009
Fitting, Port Plug and Bleeder
2005
SAE AS5169-2005
FITTING, PORT PLUG AND BLEEDER
1998
SAE AS5169-1998
Fitting@ Port Plug and Bleeder (FSC 4730; Should Be Used Instead of the Following Two Flared Fittings Standards@ Which Were Cancelled on 28 September 1999: AN814 REV 14 and MS24391H)
Copyright ©2023 All Rights Reserved