EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
This European Standard specifies the requirements and test methods for the safety and efficiency of non- domestic gas-fired air heaters having a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as "appliances".This includes appliances having forced draught burners.This European Standard applies to Type B12, B13, B14, B22, B23, B42, B43, B44, B52, B53, C12, C13, C32, C33, C62 and C63 appliances with a heat input not exceeding 300 kW (based on net calorific value) intended for use in other than single unit residential dwellings. It also applies to appliances intended for outdoor installation. Provision of the heated air may be by means of ducting or may be directly into the heated space. For Type C62 and C63 appliances,This European Standard only applies when such appliances are intended for final installation in a similar manner to Type C3 appliances.This standard does not apply to: a) appliances intended for use in a single unit residential dwelling; b) appliances of the condensing type; c) appliances with atmospheric burners without a fan to assist the transportation of combustion air and/or flue gases; d) dual purpose air conditioning appliances (heating and cooling); e) appliances where the air is heated by an intermediate fluid; f) appliances fitted with manual or automatic flue dampers; g) portable or transportable forced convection appliances; h) appliances having multiple heating units with a single draught diverter; i) appliances fitted with more than one flue outlet; j) appliances that are designed for continuous condensation within the flue system under normal operating conditions; k) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic.This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are not type tested would need to be subject to further consideration.
EN 1020:2009 Referenced Document
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 12067-1:1998 Gas/Air Ratio Controls for Gas Burners and Gas Burning Appliances - Part 1: Pneumatic Types
EN 125:1991 Flame Supervision Devices for Gas Burning Appliances - Thermo-Electric Flame Supervision Devices Includes Amendment A1: 1996
EN 126:2004 Multifunctional controls for gas burning appliances
EN 161:2007 Automatic shut-off valves for gas burners and gas appliances
EN 1859:2000 Chimneys - Metal Chimneys - Test Methods Incorporating Amendment A1: June 2006
EN 257:1992 Mechanical Thermostats for Gas-Burning Appliances Includes Amendment A1 : 1996
EN 298:2003 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
EN 437:2003 Test gases - Test pressures - Appliance categories (Incorporates Amendment A1: 2009)
EN 60335-1:2002 Household and similar electrical appliances ?Safety Part 1: General requirements Incorporates Amendments A2: 2006, A11: 2004 and A12: 2006; Incorporating corrigendum January 2007; Incorporates Amendment A13: 2008; Incorporating corrigendum July 2009 and
EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
EN 1020:2009 history
2009EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
1999EN 1020:1997/PRA1:1999 AMD A1 Non-Domestic Gas-Fired Forced Convection Air Heaters for Space Heating Not Exceeding a Net Heat Input of 300 kW, Incorporating a Fan to Assist Transportation of Combustion Air and/or Combustion Products
1997EN 1020:1997 Non-Domestic Gas-Fired Forced Convection Air Heaters for Space Heating Not Exceeding a Net Heat Input of 300 kW@ Incorporating a Fan to Assist Transportation of Combustion Air and/or Combustion Products (Incorporates Amendment A1: 2001)