DIN EN 14010:2009
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages; German version EN 14010:2003+A1:2009

Standard No.

DIN EN 14010:2009

Release Date

2009

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN 14010:2009-12

Latest

DIN EN 14010:2009-12

Replace

DIN EN 14010/A1:2009 DIN EN 14010:2004

Scope

1.1 This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation1, operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered. 1.2 This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled. 1.3 This standard does not cover: a) vehicle lifts (see EN 1493); b) peripheral devices, which do not handle motor vehicles, e.g. parking meters, ticket machines; c) requirements related to the building even if they support directly stored vehicles; d) goods only lifts in accordance with EN 81-31; e) power driven parking equipment intended for lifting and/or transporting any person; f) transmission and interface of remote controls; g) automatic parking equipment with transfer areas which move; h) the use of power driven parking equipment by wheelchair users and deaf persons; i) the workplace of any attendant. 1.4 This standard does not deal with the following: a) hazards arising if loads, or other items fall from vehicles; b) hazards arising if fuel or oil leaks from vehicles; c) hazards caused by operating the equipment/system in electromagnetic fields outside the range of EN 51000-6-2; d) hazards caused by operating the equipment/system in areas subject to special regulations (e.g. explosive atmospheres, fire risks); e) hazards caused by the use of dangerous/toxic materials, e.g. special hydraulic oil; f) hazards caused by noise; g) hazards arising from inadequate lighting of the surrounding of automatic parking systems and/or the place of installation of non-automatic parking equipment; h) hazards caused by earthquakes; i) hazards caused by vandalism; j) hazards due to the use of programmable electronic systems related to safety functions; k) hazards due to the use of cableless control devices; I) hazards arising due to collision caused by the driver of the vehicle. This document is not applicable to power driven parking equipment and systems manufactured before the date of publication of this document by CEN.

DIN EN 14010:2009 Referenced Document

• EN 1005-2 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
• EN 1005-3 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
• EN 1037:1995 Safety of machinery - Prevention of unexpected start-up (Incorporates Amendment A1: 2008)
• EN 1050:1996 Safety of Machinery - Principles for Risk Assessment
• EN 1088 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection Incorporates Amendment A2: 2008
• EN 12150-1 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
• EN 12385-4 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
• EN 12385-5 Steel wire ropes - Safety - Part 5: Stranded ropes for lifts*， 2021-02-28 Update
• EN 12433-1 Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors
• EN 12453 Industrial@ commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods*， 2019-06-01 Update
• EN 12604 Industrial@ commercial and garage doors and gates - Mechanical aspects - Requirements and test methods*， 2019-06-01 Update
• EN 12635 Industrial, commercial and garage doors and gates - Installation and use (Incorporates Amendment A1: 2008)
• EN 12978 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
• EN 1760-2 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars Incorporates Amendment A1: 2009
• EN 1837 Safety of machinery - Integral lighting of machines*， 2020-11-30 Update
• EN 294:1992 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
• EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (Incorporates Amendment A1: 2008)
• EN 418:1992 Safety of machinery; emergency stop equipment, functional aspects; principles for design
• EN 457 Safety of machinery; auditory danger signals; general requirements, design and testing (ISO 7731:1986, modified)
• EN 811 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Lower Limbs
• EN 842 Safety of machinery - Visual danger signals - General requirements, design and testing
• EN 953 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (Incorporates Amendment A1: 2009)
• EN 954-1:1996 Safety of Machinery - Safety-Related Parts of Control Systems - Part 1: General Principles for Design
• EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics Incorporates Amendment A1: 2008

DIN EN 14010:2009 history

• 2009 DIN EN 14010:2009-12 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages; German version EN 14010:2003+A1:2009 / Note: DIN EN 14010 (2004-03) remains valid alo...
• 2009 DIN EN 14010:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages; German version EN 14010:2003+A1:2009
• 0000 DIN EN 14010:2004