DIN EN 1218-4:2009
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s); German version EN 1218-4:2004+A2:2009

Standard No.

DIN EN 1218-4:2009

Release Date

2009

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 18217:2015

Latest

DIN EN ISO 18217:2015

Replace

DIN EN 1218-4:2004 DIN EN 1218-4 Berichtigung 1:2007 DIN EN 1218-4/A1:2006

Scope

This document deals with all the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to edge banding machines fed by chain(s) where the loading and unloading is manual and where the maximum work-piece height capacity is 75 mm. The machine is designed to process in one pass, one end (single end machine) or both ends (double end machine) of solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings. The work-piece is fed through the processing units by an integrated feed. For the purpose of this document an edge banding machine fed by chain(s) is hereinafter referred to as the machine. This document does not apply to single and double end edge banding machines fed by chain or chains with a complete enclosure as defined in 3.3.10. This document does not deal with any hazards relating to: a) mechanical loading of the work-piece to a single machine; or b) single machine being used in combination with any other machine (as part of a line); or c) use of tools working between the machine halves (see 3.3.1); or d) use of laser. For Computer Numerically Controlled (CNC) machines this document does not cover hazards related to Electro-Magnetic Compatibility (EMC). NOTE The requirements of this document apply to all machines whatever their method of control e. g. electromechanical and/or electronic. This document is primarily directed to machines which are manufactured after the date of publication by CEN.

DIN EN 1218-4:2009 Referenced Document

• EN 1005-1:2001 Safety of machinery - Human physical performance - Part 1: Terms and definitions Incorporates Amendment A1: 2008*， 2024-04-19 Update
• EN 1005-2:2003 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery (Incorporates Amendment A1: 2008)
• EN 1005-3:2002 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation Incorporates Amendment A1: 2008
• EN 1005-4:2005 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery (Incorporates Amendment A1: 2008)
• EN 1037:1995 Safety of machinery - Prevention of unexpected start-up (Incorporates Amendment A1: 2008)
• EN 1088:1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection Incorporates Amendment A2: 2008
• EN 1760-2:2001 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars Incorporates Amendment A1: 2009
• EN 1837:1999 Safety of machinery - Integral lighting of machines (Incorporates Amendment A1: 2009)
• EN 50144-1:1995 Safety of Hand-Held Electric Motor Operated Tools Part 1: General Requirements
• EN 50370-1:2005 Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission
• EN 563:1994 Safety of Machinery - Temperatures of Touchable Surfaces - Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces (Incorporates Amendment A1: 1999)
• EN 614-1:2006 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles (Incorporates Amendment A1: 2009)
• EN 847-1:2005 Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades Incorporates Amendment A1: August 2007
• EN 894-1:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators (Incorporates Amendment A1: 2008)
• EN 894-2:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays (Incorporates Amendment A1: 2008)
• EN 894-3:2000 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (Incorporates Amendment A1: 2008)
• EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics Incorporates Amendment A1: 2008
• EN 983:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics Incorporates Amendment A1: 2008

DIN EN 1218-4:2009 history

• 2015 DIN EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015); German version EN ISO 18217:2015
• 2009 DIN EN 1218-4:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s); German version EN 1218-4:2004+A2:2009
• 2007 DIN EN 1218-4 Corrigendum 1:2007 Safety of woodworking machines-Tenoning machines-Part 4:Edge banding machines fed by chain(s) Corrigendum 1 to English version of DIN EN 1218-4:2004-12
• 0000 DIN EN 1218-4/A1:2006
• 0000 DIN EN 1218-4:2004