BS EN 61676:2002+A1:2009
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology

Standard No.
BS EN 61676:2002+A1:2009
Release Date
2003
Published By
British Standards Institution (BSI)
Latest
BS EN 61676:2002+A1:2009
Replace
00/565786 DC-2000 BS EN 61676:2002
Scope
This International Standard specifies the performance requirements of instruments as used in the NON-INVASIVE MEASUREMENT of X-RAY TUBE VOLTAGE up to 150 kV and the relevant compliance tests. This standard also describes the method for calibration and gives guidance for estimating the uncertainty in measurements performed under conditions different from those during calibration. Applications for such measurement are found in diagnostic RADIOLOGY including mammography, COMPUTED TOMOGRAPHY (CT), dental radiology and RADIOSCOPY. This standard is not concerned with the safety aspect of such instruments. The requirements for electrical safety applying to them are contained in IEC 61010-1.

BS EN 61676:2002+A1:2009 Referenced Document

BS EN 61676:2002+A1:2009 history

  • 2003 BS EN 61676:2002+A1:2009 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
  • 2003 BS EN 61676:2002 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology



Copyright ©2024 All Rights Reserved