The purpose of this fuel filter test method is to provide standardized methods for evaluating the performance characteristics of fuel filters by bench test methods. This, combined with data obtained from application tests, may be used to establish standards of performance for filters when tested by these standard methods. Many variations in requirements of filtration to protect fuel supply equipment on engines and variations in operating conditions make it difficult to specify meaningful "in-service" performance standards by which a filter may be judged. By the use of these standard test methods, test conditions are always the same, and comparisons of the performance of filters may be made with a high degree of confidence. Once the requirements of a particular application are known, performance standards for suitable filters may be established by these test methods, and adequacy of performance of filters for the job may be determined. In order to achieve the highest degree of reliability of test results, the procedures and equipment must conform to those specified in this code. No minimum performance requirements for filters have been specified, since these are the responsibility of the user and manufacturer. Only the methods of determining, interpreting and reporting performance characteristics are the proper province of this document. Separate chapters cover the test methods mecessary to evaluate the several functional capabilities and mechanical properties of the filter. Each chapter is complete with recommended materials, apparatus, and procedures for testing and evaluation.
SAE J905-2009 Referenced Document
ASME Y32.10-1967 Graphic Symbols for Fluid Power Diagrams (Y32.10 - 1967)
ISO 12103-1:1997 Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust
ISO 1219-1:1991 Fluid power systems and components; graphic symbols and circuit diagrams; part 1: graphic symbols
ISO 1219-1:2006 Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data-processing applications
ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity
ISO 2941:2009 Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating
ISO 3722:1976 Hydraulic fluid power; Fluid sample containers; Qualifying and controlling cleaning methods
ISO 4021:1992 Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system
SAE J1124-1987 Glossary of Terms Related to Fluid Filters and Filter Testing