ISO 13347-3:2004
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods

Standard No.

ISO 13347-3:2004

Release Date

2004

Published By

International Organization for Standardization (ISO)

Status

Be replaced

Replace By

ISO 13347-3:2004/cor 1:2006

Latest

ISO 13347-3:2004/Amd 1:2010

Scope

This part of ISO 13347 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined. The sizes of fan which can be tested in accordance with this part of ISO 13347 are limited only by the practical aspects of the test set-up. Dimensional limitations, test fan dimensions, and air performance will control the room size, power and mounting requirements for the test fan. (Small fans may be tested according to this part of ISO 13347 or to ISO 10302, according to usage). The test arrangements in this part of ISO 13347 establish the laboratory conditions necessary for a successful test. Rarely will it be possible to meet these requirements in situ and this part of ISO 13347 is not intended for field measurements. Intending users are reminded that, in these situations, there may well be additional acoustic system effects where inlet and outlet conditions at the fan are less than ideal. The enveloping surface methods may be used for the determination of open inlet and/or open outlet sound power level of fans for the standardized installation types given in 3.1. An estimation (with increased uncertainty) of ducted sound power for fans too small, or otherwise inconvenient, for testing by the in-duct method described in ISO 5136 may also be obtained by the addition of end reflection corrections (see Annex C of ISO 13347-1:2004).

ISO 13347-3:2004 history

• 2010 ISO 13347-3:2004/Amd 1:2010 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods; Amendment 1
• 2006 ISO 13347-3:2004/cor 1:2006 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods; Technical Corrigendum 1
• 2004 ISO 13347-3:2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods