SAE J2833-2009
Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
- Standard No.
- SAE J2833-2009
- Release Date
- 2009
- Published By
- Society of Automotive Engineers (SAE)
- Status
- 2018-06
- Replace By
- SAE J2833-2018
- Latest
- SAE J2833-2018
- Scope
- This specification covers sub-critically annealed electric resistance welded and cold-drawn single-wall high strength low alloy steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, cold forming, welding and brazing. The grade of material produced to this specification is of micro-alloy content and is considerably stronger and intended to service higher pressure applications using thinner walls than like sizes of the grades of material specified in SAE J525, SAE J2467 and SAE J2614. Due to the alloy content of the material, the forming characteristics of the finished tube are equal to or better, when compared to SAE J525, SAE J2467 and SAE J2614. Nominal reference working pressures for this tubing are listed in ISO 10763 and SAE J1065. Caution: When brazing or welding is used as a tube end joining method, the structural integrity of the tube material can potentially be compromised due to the degradation of the areas affected by the thermal effect applied to the tubing; therefore, the ISO 10763 and SAE J1065 nominal reference working pressures may not be applicable. Brazed and/or welded tube assembly configurations made to specific geometry and components bill of material in association with this material, may require qualification testing in accordance with ISO 19879 Test Methods for Hydraulic Fluid Power Connections. Cold forming the tube end configurations avoids this systemic testing by not compromising the tube material structural integrity.
SAE J2833-2009 Referenced Document
- ASTM A513-08 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing*， 2024-04-19 Update
- EN 10305-2:2002 Steel tubes for precision applications Technical delivery conditions Part 2: Welded cold drawn tubes*， 2024-04-19 Update
- EN 10305-4:2003 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- ISO 10583:1993 Aerospace fluid systems; test methods for tube/fitting assemblies
- ISO 10763:1994 Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
- ISO 19879:2005 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
- ISO 3304:1985 Plain end seamless precision steel tubes; Technical conditions for delivery
- ISO 3305:1985 Plain end welded precision steel tubes; Technical conditions for delivery
- ISO 4200:1991 Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length
- ISO 4397:1993 Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses
- ISO 4399:1995 Fluid power systems and components - Connectors and associated components - Nominal pressures
- ISO 5598:2008 Fluid power systems and components - Vocabulary
- ISO 6162:1994 Hydraulic fluid power; four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar); type I metric series and type II inch series
- ISO 6605:2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods
- ISO 8434:1986 Hydraulic fluid power; Connection for tubes and hoses; Dimensions and designs for 37 degrees flare and 24 degrees flareless fittings
- SAE J409-1995 Product Analysis Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel
- SAE J514-2004 Hydraulic Tube Fittings
SAE J2833-2009 history
- 2018 SAE J2833-2018 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
- 2009 SAE J2833-2009 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
