BS EN ISO 23553-1:2009 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners (ISO 23553-1:2007, including Cor 1:2009)
This part of ISO 23553 specifies safety, constructional and performance requirements, and testing of safety shut-off devices, for liquid fuels.
This part of ISO 23553 covers type testing only.
It applies to safety shut-off devices which:
-are designed as e.g. automatic valves or fast-closing devices;
-are used in combustion plants to interrupt the flow of liquid fuels with or without delay on closing and with or without delay on opening;
-are for use with fuel oils;
-form part of a device having other function(s), such as oil pumps. In this case the test methods apply to those parts or components of the device forming the safety shut-off device, i.e. those parts which are necessary for the closing function;
-have declared maximum working pressures up to and including 5 000 kPa, for use on burners or in
appliances using liquid fuels;
-are directly or indirectly operated electrically or by mechanical or hydraulic means;
-are fitted with or without closed-position indicator switches.
The methods of test given in this part of ISO 23553 are intended for product type testing.
BS EN ISO 23553-1:2009 Referenced Document
EN 1057 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications*， 2010-02-01 Update
IEC 60529:2001 Degrees of protection provided by enclosure (IP code)*， 2024-04-19 Update
IEC 60534-1 Industrial-process control valves - Part 1: Control valve terminology and general considerations*， 2023-05-23 Update
IEC 60534-2-3 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures*， 2015-12-01 Update
IEC 60730-1:1999 Automatic electrical controls for household and similar use - Part 1: General requirements
ISO 1817:2005 Rubber, vulcanized - Determination of the effect of liquids
ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 23550:2004 Safety and control devices for gas burners and gas-burning appliances - General requirements
ISO 23551-1:2006 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic valves
ISO 7-1 Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation TECHNICAL CORRIGENDUM 1
ISO 7005-1 Pipe flanges - Part 1: Steel flanges for industrial and general service piping systems*， 2011-07-01 Update
ISO 7005-2 Metallic flanges; part 2: cast iron flanges
ISO 7005-3 Metallic flanges; part 3: copper alloy and composite flanges
BS EN ISO 23553-1:2009 history
2022BS EN ISO 23553-1:2022 Safety and control devices for oil burners and oil-burning appliances. Particular requirements. Automatic and semi-automatic valves
2014BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements. Automatic and semi-automatic valves
2009BS EN ISO 23553-1:2009 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners (ISO 23553-1:2007, including Cor 1:2009)
1991BS EN 264:1991 Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels
BS EN ISO 23553-1:2009 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners (ISO 23553-1:2007, including Cor 1:2009) has been changed from BS EN 264:1991 Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels.