ASTM E1911-09ae1
Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

Standard No.

ASTM E1911-09ae1

Release Date

2009

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM E1911-19

Latest

ASTM E1911-19

Scope

This test method provides a measure of surface friction as a function of sliding speed, either in the field or in a laboratory.

This test method may be used to determine the relative effects of various polishing techniques on materials or material combinations.

The values measured in accordance with this method do not necessarily agree or directly correlate with those obtained utilizing other methods of determining friction properties or skid resistance.

1.1 This test method covers the procedure for measuring paved surface frictional properties as a function of speed using the Dynamic Friction Tester (DF-Tester).

1.2 The DF Tester consists of a horizontal spinning disk fitted with three spring loaded rubber sliders which contact the paved surface as the disk rotational speed decreases due to the friction generated between the sliders and the paved surface. A water supply unit delivers water to the paved surface being tested. The torque generated by the slider forces measured during the spin down is then used to calculate the friction as a function of speed.

1.3 The DF Tester can be used for laboratory investigations and in the field on actual paved surfaces.

1.4 The values stated in SI (metric) units are to be regarded as standard. The inch-pound equivalents are rationalized, rather than exact mathematical conversions.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.`

ASTM E1911-09ae1 Referenced Document

• ASTM E1845 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
• ASTM E274 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
• ASTM E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
• ASTM E867 Terminology Relating to Vehicle-Pavement Systems

ASTM E1911-09ae1 history

• 2019 ASTM E1911-19 Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
• 2009 ASTM E1911-09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
• 2009 ASTM E1911-09a Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
• 2009 ASTM E1911-09 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
• 2007 ASTM E1911-07 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
• 1998 ASTM E1911-98(2002) Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
• 1998 ASTM E1911-98 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester