1.1 This specification covers and prescribes the recommended standard metric sizes of solid round electrical conductors.
1.2 This specification prescribes the recommended standard metric size designations of stranded electrical conductors (see Explanatory Note 1).
Note 18212;Physical properties, construction requirements, and manufacturing tolerances for specific products should be included in individual product specifications developed in accordance with appropriate sizes in this specification.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3.1 Exceptions — For conductor sizes designated by AWG or kcmil, the requirements in SI units have been numerically converted from corresponding values, stated or derived, in inch-pound units. For conductor sizes designated by SI units only, the requirements are stated or derived in SI units. Rounded values appear in Table 1.
TABLE 1 Standard Metric Diameters and Cross-Sectional Areas of Solid Round Wires at 20°C
| Diameter | Cross-Sectional Area | |||
|---|---|---|---|---|
| mm (R 20 Series) | in.A | mm2 | in.2A | kcmilA |
| 18.0 | 0.708 7 | 254.5 | 0.394 4 | 502.2 |
| 16.0 | 0.629 9 | 201.1 | 0.311 6 | 396.8 |
| 14.0 | 0.551 8 | 153.9 | 0.238 6 | 303.8 |
| 12.5 | 0.492 1 | 122.7 | 0.190 2 | 242.2 |
| 11.2 | 0.440 9 | 98.52 | 0.152 7 | 194.4 |
| 10.0 | 0.393 7 | 78.54 | 0.121 7 | 155.0 |
| 9.00 | 0.354 3 | 63.62 | 0.098 61 | 125.6 |
| 8.00 |
ASTM B682-01(2009) history
Copyright ©2024 All Rights Reserved | |||