DIN EN 13155:2009
Cranes - Safety - Non-fixed load lifting attachments(includes Amendment A2:2009); English version of DIN EN 13155:2009-08

Standard No.

DIN EN 13155:2009

Release Date

2009

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN 13155 E:2011-08

Latest

DIN EN 13155/A1:2023-05

Replace

DIN EN 13155/A2:2008

Scope

This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: -- plate clamps; -- vacuum lifters; -- self priming, -- non-self priming (pump, venturi, turbine); -- electric lifting magnets (battery fed and mains-fed); -- permanent lifting magnets; -- electro-permanent lifting magnets; -- lifting beams; -- C-hooks; -- lifting forks; -- clamps; defined in clause 3. This standard does not specify the additional requirements for: non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials); -- hazards caused by operation in an explosive atmosphere; -- hazards caused by noise; -- electrical hazards; -- hazards due to hydraulic and pneumatic components. This standard does not cover the hazards related to mechanical strength of structural elements of attachments designed for more than 20 000 lifting cycles. NOTE The coefficient of utilization specified in clause 5.1.1 ensures that no fatigue verification is needed for less than 20 000 cycles. This is in accordance with the well accepted calculation codes e.g. FEM 1001. This standard does not cover attachments intended to lift above people. This standard does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. The hazards covered by this European Standard are identified in clause 4. This European Standard does not cover hazards related to the lifting of persons. This European Standard is applicable to non-fixed load lifting attachments which are manufactured after the date of approval by CEN of this standard. q

DIN EN 13155:2009 Referenced Document

• EN 10025 Hot rolled products of non-alloy structural steels; technical delivery conditions
• EN 10045-1 Metal Products, Mechanical Tests, Charpy Impact Tests, Test Specimens, Testing Conditions
• EN 1070 Safety of Machinery - Terminology
• EN 1492-1 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
• EN 1492-2 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use (Incorporates Amendment A1: 2008)
• EN 25817 Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992)
• EN 287-1 Qualification test of welders - Fusion welding - Part 1: Steels Incorporating Corrigendum August 2004; Includes Amendment A2:2006
• EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (Incorporates Amendment A1: 2008)
• EN 457 Safety of machinery; auditory danger signals; general requirements, design and testing (ISO 7731:1986, modified)
• EN 818-4 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
• EN 818-5 Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
• EN 842 Safety of machinery - Visual danger signals - General requirements, design and testing
• EN 981 Safety of machinery - System of auditory and visual danger and information signals
• EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology Incorporates Amendment A1: 2009 [Superseded: CEN EN 292-1]*， 2024-04-19 Update
• EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles Incorporates Amendment A1: 2009 [Superseded: CEN EN 292-2]*， 2024-04-19 Update

DIN EN 13155:2009 history

• 2023 DIN EN 13155/A1:2023-05 Cranes - Safety - Non-fixed load lifting attachments; German and English version EN 13155:2020/prA1:2023 / Note: Date of issue 2023-03-31*Intended as an amendment to DIN EN 13155 (2022-03).
• 2022 DIN EN 13155:2022-03 Crane - Safety - Non-fixed load lifting attachments; German version EN 13155:2020
• 2022 DIN EN 13155:2022 Crane - Safety - Non-fixed load lifting attachments
• 2017 DIN EN 13155:2017 Crane - Safety - Non-fixed load lifting attachments; German and English version prEN 13155:2017
• 1970 DIN EN 13155 E:2014-12 Cranes - Safety - Non-fixed load lifting attachments
• 2014 DIN EN 13155 E:2014 Draft Document - Crane - Safety - Non-fixed load lifting attachments; German version prEN 13155:2014
• 1970 DIN EN 13155 E:2011-08 Cranes - Safety - Non-fixed load lifting attachments
• 2009 DIN EN 13155:2009 Cranes - Safety - Non-fixed load lifting attachments(includes Amendment A2:2009); English version of DIN EN 13155:2009-08
• 2007 DIN EN 13155:2007 Cranes - Non fixed load lifting attachments; German version EN 13155:2003+A1:2005
• 1970 DIN EN 13155:2004 Cranes - Safety - Non-fixed load lifting attachments