BS EN 14462:2005+A1:2009
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Standard No.

BS EN 14462:2005+A1:2009

Release Date

2005

Published By

British Standards Institution (BSI)

Status

Be replaced 2015-02

Replace By

BS EN 14462:2015

Latest

BS EN 14462:2015

Replace

02/706364 DC-2002 BS EN 14462:2005

Scope

This document specifies all the information necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the airborne noise emission of surface treatment machines as stated in Annex A. Surface treatment machines include but are not limited to -machines for cleaning and pre-treatment of industrial item surfaces, -machinery for coating and colour mixing, -coating plants and -dryers, ovens and evaporating equipment. This document describes the determination of emission sound pressure levels at work stations or other specified positions as well as the determination of sound power levels for surface treatment machines as stated in Annex A. This can be small single units (e.g. handheld atomising spraying equipment) and also complex machines with large dimensions (e.g. machines for cleaning and pre-treatment of industrial item surfaces, spray booths, dryers), which could also be linked. In case of very large machines as defined in 3.10 the determination of sound power level may be very complicated or cannot be done with a reasonable amount of work. Therefore in this document, the measurement for very large machines is simplified by determining an averaged emission sound pressure level instead of the sound power level. This document specifies noise measurement methods, installation/mounting and operation conditions that shall be used for the test. The use of this document ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used (see 5.1 and 6.1). Noise measurement methods allowed by this document are engineering methods (grade 2) and survey methods (grade 3). For continuous flow dryers for paper, board and foil (see EN 13023). This document applies to surface treatment machines manufactured after the date of issue of this document.

BS EN 14462:2005+A1:2009 Referenced Document

• EN 12215 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements*， 2009-08-01 Update
• EN 12581 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements*， 2010-06-01 Update
• EN 12621 Machinery for the supply and circulation of coating materials under pressure - Safety requirements*， 2010-06-01 Update
• EN 12753 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (Incorporates Amendment A1: 2010)*， 2005-05-01 Update
• EN 12757-1 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing*， 2010-06-01 Update
• EN 12921-1 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements*， 2010-05-01 Update
• EN 12921-2 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids*， 2008-11-01 Update
• EN 12921-3 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids*， 2008-11-01 Update
• EN 12921-4 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents*， 2008-11-01 Update
• EN 12981 Coating plants - Spray booths for application of organic powder coating material - Safety requirements*， 2009-04-01 Update
• EN 13355 Coating plants - Combined booths - Safety requirements*， 2009-04-01 Update
• EN 1539 Dryers and ovens, in which flammable substances are released - Safety requirements*， 2015-10-01 Update
• EN 1953 Atomising and spraying equipment for coating materials - Safety requirements*， 2013-09-01 Update
• EN 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications*， 2024-04-19 Update
• EN ISO 11201 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections*， 2010-05-01 Update
• EN ISO 11202 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)*， 2021-04-30 Update
• EN ISO 11204 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)*， 2010-05-01 Update
• EN ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)*， 2024-04-19 Update
• EN ISO 3746 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)*， 2024-04-19 Update
• EN ISO 3747 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)*， 2024-04-19 Update
• EN ISO 4871:1996 Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment ISO 4871: 1996
• EN ISO 9614-1 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points*， 2009-08-01 Update
• EN ISO 9614-2 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning ISO 9614-2: 1996

BS EN 14462:2005+A1:2009 history

• 2015 BS EN 14462:2015 Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
• 2005 BS EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
• 2005 BS EN 14462:2005 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3