BS EN 12417:2001+A2:2009
Machine tools - Safety - Machining centres

Standard No.

BS EN 12417:2001+A2:2009

Release Date

2001

Published By

British Standards Institution (BSI)

Status

Be replaced 2001-01

Replace By

BS EN 12417:2001+A2:2009(2010)

Latest

BS EN 12417:2001+A2:2009(2010)

Replace

BS EN 12417:2001 95/706058 DC-1995

Scope

1.1 This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of machining centres (see 3.1). 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to the workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to machining centres when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 This standard applies to machines which are manufactured after (its date of publication).

BS EN 12417:2001+A2:2009 Referenced Document

• EN 50081-2:1993 Electromagnetic Compatibility - Generic Emission Standard Part 2: Industrial Environment
• EN 60204-1:1997 Safety of Machinery - Electrical Equipment of Machines Part 1: General Requirements (Remains Current)
• EN 60825-1:1994 Safety of Laser Products; Part 1: Equipment Classification@ Requirements and User's Guide (Incorporating Corrigendum February 1995; Incorporates Amendment A11: 1996)
• EN 61000-6-2 Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments*， 2005-08-01 Update
• EN ISO 11202:1995 Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Survey Method in Situ (ISO 11202 : 1995)
• EN ISO 11688-1:1998 Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 1: Planning ISO/TR 11688-1:1995
• EN ISO 15641 Miling Cutters for High Speed Machining - Safety Requirements ISO 15641:2001*， 2001-09-01 Update
• EN ISO 3744:1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field Over a Reflecting Plane (ISO 3744 : 1994)
• EN ISO 3746:1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane (ISO 3746 : 1995)
• EN ISO 9614-1:1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points ISO 9614-1 : 1993
• ISO/TR 11688-2:1998 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design

BS EN 12417:2001+A2:2009 history

• 0000 BS EN 12417:2001+A2:2009(2010)
• 2001 BS EN 12417:2001+A2:2009 Machine tools - Safety - Machining centres
• 2001 BS EN 12417:2001 Machine tools - Safety - Machining centres