AS 1141.11.1:2009 PDF

Scope: This Standard sets out the method for the determination of particle size distribution in coarse and fine aggregates and fillers for asphalt by sieving. The amount passing a 75 μm sieve may be determined using AS 1141.12 or by this method when samples are washed over a 75 μm sieve. If the percentage of material passing a 75 μm sieve is specified, the procedures detailed in Clause 5.6 of this method or in AS 1141.12 apply. The procedure for the determination of fine particle size distribution by decantation is described in AS 1141.19.

AS 1141.11.1:2009 Referenced Document

AS 1141 SAMPLING AND TESTING AGGREGATES
AS 1141.1 Methods for sampling and testing aggregates, Part 1: Definitions
AS 1141.12 Methods for sampling and testing of aggregates - Materials finer than 75 micrometre in aggregates (by washing)
AS 1141.13 Methods for sampling and testing aggregates - Material finer than 2 micrometer
AS 1141.19 Methods for sampling and testing aggregates, Method 19: Fine particle size distribution in road materials by sieving and decantation
AS 1141.2 AS 1141.2 Basic test equipment
AS 1152 Specification for test sieves
AS 3638 Test sieving procedures

1970 AS 1141.11.1:2020/Amdt 1:2022 Sampling and testing methods for aggregates Particle size distribution screening method
2020 AS 1141.11.1:2020 Methods for sampling and testing aggregates, Method 11.1: Particle size distribution — Sieving method
1970 AS 1141.11.1:2009/Amdt 1:2011 Sampling and testing methods for aggregates Particle size distribution screening method
2009 AS 1141.11.1:2009 Methods for sampling and testing aggregates Method 11.1: Particle size distribution—Sieving method