1.1 General
This document identifies the significant hazards (see 4) in the use of all sizes of HP by fire fighting
and rescue services, on the basis that they are supplied in a complete form, tested and ready for use,
and gives methods for the elimination or reduction of these hazards and for the use of safe working
practices.
NOTE The principles of this standard have been used for HPs ranging from the smallest up to working
heights exceeding 70 m, and are expected to be applicable to all foreseeable developments of HPs for Fire
Services.
This document deals with HPs, the base of which is normally a motor vehicle, but can also be static or
fixed, or mobile in the form of:
— a trailer or de-mountable unit
— any other type of self-propelled vehicle
For vehicle mounted HPs this document is intended to be used in conjunction with EN 1846-2, Fire
fighting and rescue service vehicles —Part 2: Common requirements — Safety and performance.
This document is not applicable to HPs which were manufactured before the date of publication of this
document by CEN.
1.2 This document is applicable to the structural design calculations and stability criteria,
constructional details and tests of HPs, and gives guidance on the intended life limits for HPs
(see 5.2.5.2.2).
NOTE This document may also be used for machines similar to HPs equipped with monitors, surveillance or
other equipment for firefighting use but not intended for lifting persons.
1.3 This document does not specify the special requirements for:
? HPs operated by programmable electronic systems and/or radio which do not rely on cables;
? use in underground work (mines);
? use in potentially explosive atmospheres;
? the use of pneumatic cylinders to operate load carrying components.
1.4 Classification
HPs are divided into two main types:
Type A: HPs where the vertical projection of the centre of gravity of the load is always inside the
tipping lines.
Type B: HPs where the vertical projection of the centre of gravity of the load may be outside the
tipping lines.
HPs are further divided into three groups related to travelling:
Group 3: (Self-propelled) Travelling with raised platform is controlled from a point of control at the
platform.
Group 1: Travelling is only allowed with the HP in its transport position.
Group 2: Travelling with raised platform is controlled only from a point of control at the chassis.
BS EN 1777:2004+A1:2009 history
2010BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
2004BS EN 1777:2004+A1:2009 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
2004BS EN 1777:2004 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing