This part of IEC 60204 applies to the application of electrical, electronic and programmable
electronic equipment and systems to machines not portable by hand while working, including
a group of machines working together in a co-ordinated manner.
The equipment covered by this part of IEC 60204 commences at the point of connection of
the supply to the electrical equipment of the machine (see 5.1).
This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical
equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating
current (a.c.) and not exceeding 1 500 V for direct current (d.c.), and with nominal supply
frequencies not exceeding 200 Hz.
This part of IEC 60204 does not cover all the requirements (for example guarding,
interlocking, or control) that are needed or required by other standards or regulations in order
to protect persons from hazards other than electrical hazards. Each type of machine has
unique requirements to be accommodated to provide adequate safety.
This part specifically includes, but is not limited to, the electrical equipment of machines as
defined in 3.35.
This part of EN 60204 does not specify additional and special requirements that can apply to the
electrical equipment of machines including those that
– are intended for use in open air (i.e. outside buildings or other protective structures);
– use, process, or produce potentially explosive material (for example paint or sawdust);
– are intended for use in potentially explosive and/or flammable atmospheres;
– have special risks when producing or using certain materials;
– are intended for use in mines;
– are sewing machines, units, and systems;
– are hoisting machines.
NOTE 8 For hoisting machines, see EN 60204-32.
Power circuits where electrical energy is directly used as a working tool are excluded from
this part of IEC 60204.
BS EN 60204-1:2006+A1:2009 Referenced Document
ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology
ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles
ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design*, 2006-11-01 Update
ISO 13849-2:2003 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
ISO 13850:2006 Safety of machinery - Emergency stop - Principles for design*, 2006-11-01 Update
BS EN 60204-1:2006+A1:2009 history
0000 BS EN 60204-1:2018(2021)
1970BS EN 60204-1:2018 Safety of machinery - Electrical equipment of machines - Particular safety and EMC requirements for sewing machines, units and systems
2006BS EN 60204-1:2006+A1:2009 Safety of machinery — Electrical equipment of machines — Part 1: General requirements
2006BS EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - General requirements
1998BS EN 60204-1:1998 Safety of machinery - Electrical equipment of machines - General requirements
1993BS EN 60204-1:1993 Safety of machinery. Electrical equipment of machines. Specification for general requirements