BS EN ISO 13790:2008
Energy performance of buildings - Calculation of energy use for space heating and cooling

Standard No.

BS EN ISO 13790:2008

Release Date

2008

Published By

British Standards Institution (BSI)

Status

Be replaced 2017-09

Replace By

BS EN ISO 52016-1:2017

Latest

BS EN ISO 52016-1:2017

Replace

BS EN 832:2000 BS EN ISO 13790:2004 05/30133622 DC:2005

Scope

This International Standard gives calculation methods for assessment of the annual energy use for space heating and cooling of a residential or a non-residential building, or a part of it, referred to as “the building”. This method includes the calculation of: a) the heat transfer by transmission and ventilation of the building zone when heated or cooled to constant internal temperature; b) the contribution of internal and solar heat gains to the building heat balance; c) the annual energy needs for heating and cooling, to maintain the specified set-point temperatures in the building – latent heat not included; d) the annual energy use for heating and cooling of the building, using input from the relevant system standards referred to in this International Standard and specified in Annex A. The building can have several zones with different set-point temperatures, and can have intermittent heating and cooling. The calculation interval is either one month or one hour. For residential buildings, the calculation can also be performed on the basis of the heating and/or cooling season. This International Standard also gives an alternative simple hourly method, using hourly user schedules (such as temperature set-points, ventilation modes or operation schedules of movable solar shading). Procedures are given for the use of more detailed simulation methods to ensure compatibility and consistency between the application and results of the different types of method. This International Standard provides, for instance, common rules for the boundary conditions and physical input data, irrespective of the calculation approach chosen. Special attention has been given to the suitability of this International Standard for use within the context of national or regional building regulations. This includes the calculation of an energy performance rating of a building, on the basis of standardized conditions, for an energy performance certificate. The result can have legal implications, in particular when it is used to judge compliance with minimum energy performance levels, which can, for instance, be required to obtain a building permit. For such applications, it is important that the calculation procedures be unambiguous, repeatable and verifiable. A special situation is the calculation of the energy performance in the case of old existing buildings, if gathering the full required input would be too labour-intensive for the purpose, relative to the cost-effectiveness of gathering the input. In this case, it is important that the calculation procedures provide the right balance between accuracy and data collection costs. To accommodate the application for these and other situations, this International Standard offers different choices. It is up to national bodies whether or not to choose a specific option for mandatory use, e.g. depending on the region in the country, the type of building and its use, and on the purpose of the assessment.

BS EN ISO 13790:2008 Referenced Document

• EN 15217 Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
• ISO 10077-1 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General*， 2017-06-01 Update
• ISO 13370:2007 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
• ISO 13786:2007 Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
• ISO 13789:2007 Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
• ISO 15927-4 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling
• ISO 6946 Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods*， 2017-06-01 Update
• ISO 7345 Thermal performance of buildings and building components — Physical quantities and definitions*， 2018-03-08 Update

BS EN ISO 13790:2008 history

• 2017 BS EN ISO 52016-1:2017 Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads. Calculation procedures
• 2008 BS EN ISO 13790:2008 Energy performance of buildings - Calculation of energy use for space heating and cooling
• 0000 BS EN ISO 13790:2004
• 0000 BS EN 832:2000

BS EN ISO 13790:2008 Energy performance of buildings - Calculation of energy use for space heating and cooling was changed to BS EN ISO 52016-1:2017 Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads. Calculation procedures.