JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
This Standard specifies a glow discharge optical emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of
metallic surface coatings consisting of zinc- and/or aluminium-based materials. The alloying elements considered are nickel, iron, silicon, lead and antimony.
This method is applicable to
zinc contents between 0.01 mass % and 100 mass %;
aluminium contents between 0.01 mass % and 100 mass %;
nickel contents between 0.01 mass % and 20 mass %;
iron contents between 0.01 mass % and 20 mass %;
silicon contents between 0.01 mass % and 10 mass %;
lead contents between 0.005 mass % and 2 mass %;
antimony contents between 0.005 mass % and 2 mass %.
NOTE : The International Standard corresponding to this Standard is as follows.
ISO 16962:2005 Surface chemical analysis-Analysis of zinc- and/or aluminium-bascd metallic coatings by glow-discharge optical-emission spectrometry (IDT)
In addition, symbols which denote the degree of correspondence in the contents between the relevant international Standard and JIS are IDT/identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.
JIS K 0150:2009 Referenced Document
ISO 17925:2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
JIS G 0417 Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
JIS K 0144 Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use*, 2018-02-20 Update
JIS Z 8402-1 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
JIS Z 8402-2 Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
JIS Z 8402-6 Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
JIS K 0150:2009 history
2009JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry