GB/T 7025.1-2008 Lifts.Main specifications and the dimensions, arrangements for its cars, wells and machine rooms.Part 1: Lifts of classes Ⅰ、Ⅱ、Ⅲ、Ⅵ (English Version)
This part specifies the necessary dimensions to allow the installation of passenger lifts of categories I, II, III and VI (defined in 2.2). The dimensions given in this section reflect the requirements of the equipment. Attention should be paid to the relevant national standards, which may require larger dimensions in some cases. This standard applies to all elevators installed in new buildings with a car with one entrance and exit, and has nothing to do with the drive system. However, if the counterweight is placed on its side, a through access can be provided, which may necessitate an increase in the depth dimension of the hoistway. In related occasions, it can also be used as the basis for the installation of elevators in buildings. For lifts that do not conform to the main parameters contained in this Part and the type and size of the car, hoistway, and machine room, the manufacturer should be consulted. This section does not apply to elevators with a speed exceeding 6.Om/s. For such elevators, the manufacturer should be consulted.
GB/T 7025.1-2008 history
2023GB/T 7025.1-2023 Elevator main parameters and types and dimensions of car, shaft and machine room Part 1: Class I, II, III, VI elevators
2008GB/T 7025.1-2008 Lifts.Main specifications and the dimensions, arrangements for its cars, wells and machine rooms.Part 1: Lifts of classes Ⅰ、Ⅱ、Ⅲ、Ⅵ
1997GB/T 7025.1-1997 Lifts--Main specifications and the dimensions, arrangements for its cars, wells and machine rooms. Part 1: Lifts of classesⅠ、Ⅱ、Ⅲ