DIN EN 61076-2-104:2009
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2008); German version EN 61076-2-104:2008

Standard No.
DIN EN 61076-2-104:2009
Release Date
2009
Published By
German Institute for Standardization
Status
Replace By
DIN EN 61076-2-104:2015
DIN EN 61076-2-104:2012
Latest
DIN EN 61076-2-104 Berichtigung 1:2021
Replace
DIN EN 61076-2-101:2006 DIN IEC 61076-2-104:2005

DIN EN 61076-2-104:2009 Referenced Document

  • IEC 60352 Solderless connections – Part 8: Compression mount connections – General requirements@ test methods and practical guidance (Edition 1.0)*， 2011-02-01 Update
  • IEC 60512 Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 9: miscellaneous tests
  • IEC 60998-2-1 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
  • IEC 60999 Connecting Devices - Safety Requirements for Screw-Type and Screwless-Type Clamping Units for Electrical Copper Conductors (Edition 1.0; CENELEC EN 60999: 1993; Corrigendum-1995)
  • IEC 61984 Connectors - Safety requirements and tests*， 2023-12-22 Update
  • ISO 1302 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation

DIN EN 61076-2-104:2009 history

  • 2021 DIN EN 61076-2-104 Berichtigung 1:2021 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014); German version EN 61076-2-104:2014; Corrigendum 1
  • 2015 DIN EN 61076-2-104:2015 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014); German version EN 61076-2-104:2014
  • 2009 DIN EN 61076-2-104:2009 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2008); German version EN 61076-2-104:2008
  • 0000 DIN EN 61076-2-101:2006
  • 0000 DIN IEC 61076-2-104:2005
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2008); German version EN 61076-2-104:2008

DIN EN 61076-2-104:2009 -All Parts

DIN EN 61076-1 A1 E:2015-02 DIN EN 61076-1:2019-10 Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 61076-1:2006 + A1:2019); German version EN 61076-1:2006 + A1:2019 / Note: DIN EN 61076-1 (2007-02) remains valid alongside this standard until 2022-02-15.*A... DIN EN 61076-3-001:2009-07 Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification (IEC 61076-3-001:2008); German version EN 61076-3-001:2008 / Note: DIN EN 61076-3-001 (2000-10) remains valid alongside this st... DIN EN 61076-3-100:2000-10 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov... DIN EN 61076-3-101 Berichtigung 1:2012-07 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells... DIN EN 61076-3-101:1998-05 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells a... DIN EN 61076-3-103:2004-11 Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) (IEC 61076-3-103:2003); German v... DIN EN 61076-3-106:2007-07 Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603... DIN EN 61076-3-112:2007-02 Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment (IEC 61076-3-112:2006); German version EN 6... DIN EN 61076-3-114:2010-01 Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environmen... DIN EN 61076-3-116:2009-07 Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environmen... DIN EN 61076-3-117:2010-01 Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603... DIN EN 61076-3:2009-07 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification (IEC 61076-3:2008); German version EN 61076-3:2008 / Note: DIN EN 61076-3 (2000-10) remains valid alongside this standard until 2011-1... DIN EN 61076-4-001:1997-04 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996 DIN EN 61076-4-100:2002-10 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality; Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001); German version EN 61... DIN EN 61076-4-101 Berichtigung 1:2010-10 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 - (IEC ... DIN EN 61076-4-101:2002-09 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 610... DIN EN 61076-4-102:1997-10 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-i... DIN EN 61076-4-103:1999-08 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4... DIN EN 61076-4-104:1999-10 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a ...


Copyright ©2023 All Rights Reserved