SAE AS1132H-2008
Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard

Standard No.
SAE AS1132H-2008
Release Date
2008
Published By
Society of Automotive Engineers (SAE)
Status
 2016-02
Replace By
SAE AS1132J-2016
Latest
SAE AS1132K-202103
Scope
The scope of this standard is to define the following dimensional requirements for double hexagon, hexagon head and tee headed bolts, and nuts having a minimum tensile strength ranging up to 220 ksi, unless otherwise specified. a. Head dimensions (see 3.1); b. shank dimensions (see 3.2); c. geometric control (see 3.3); d. surface texture (see 3.4); and e. dimensions for nuts (see Section 4). For design calculations the SAE AS 8879 coarse threads, UNJC, shall be used for 0.164 thread sizes, and for smaller thread sizes use fine threads, UNJF. For particulars of thread runout and lead threads for bolts, see SAE AS 3062. NOTE. The ability of a design to achieve a given strength class will ultimately depend on the selected material and the associated processing To establish design requirements for bolts, screws and nuts in the UNJ thread inch series primarily for use on propulsion systems. As defined by the Federal Cataloging System, thread sizes less than 0.190 are referred to as screws and larger sizes are referred to as bolts. For the purpose of this document, the term bolt will be used for all sizes.

SAE AS1132H-2008 Referenced Document

SAE AS1132H-2008 history

  • 0000 SAE AS1132K-202103
  • 2021 SAE AS1132K-2021 Bolts, Screws, and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
  • 2016 SAE AS1132J-2016 BOLTS AND SCREWS - EXTERNAL WRENCHING UNIFIED THREAD INCH SERIES - DESIGN PARAMETERS FOR
  • 2008 SAE AS1132H-2008 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
  • 2004 SAE AS1132G-2004 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
  • 2004 SAE AS1132F-2004 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch Series - Design Standard
  • 1998 SAE AS1132F-1998 Bolts@ Screws and Nuts - External Wrenching UNJ Thread@ Inch Series - Design Standard
  • 1996 SAE AS1132E-1996 Bolts@ Screws and Nuts - External Wrenching UNJ Thread@ Inch Series - Design Standard
  • 1992 SAE AS1132D-1992 BOLTS AND SCREWS - EXTERNAL WRENCHING UNJ THREAD, INCH SERIES - DESIGN PARAMETERS FOR
  • 1979 SAE AS1132C-1979 BOLTS AND SCREWS - EXTERNAL WRENCHING UNIFIED THREAD INCH SERIES - DESIGN PARAMETERS FOR
  • 1976 SAE AS1132B-1976 BOLTS AND SCREWS - EXTERNAL WRENCHING UNIFIED THREAD INCH SERIES - DESIGN PARAMETERS FOR
  • 1971 SAE AS1132A-1971 BOLTS AND SCREWS-EXTERNAL WRENCHING, UNIFIED THREAD INCH SERIES-DESIGN PARAMETERS FOR,
  • 1970 SAE AS1132-1970 BOLTS AND SCREWS-EXTERNAL WRENCHING, UNIFIED THREADED INCH SERIES - DESIGN PARAMETERS FOR,
Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard



Copyright ©2024 All Rights Reserved