ISO 8178-5:2008
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels

Standard No.

ISO 8178-5:2008

Release Date

2008

Published By

International Organization for Standardization (ISO)

Status

Be replaced

Replace By

ISO 8178-5:2015

Latest

ISO 8178-5:2021

ISO 8178-5:2008 Referenced Document

• EN 116:1997 Diesel and Domestic Heating Fuels - Determination of Cold Filter Plugging Point [Use: IP 309/99]
• ISO 10307-1 Petroleum products - Total sediment in residual fuel oils - Part 1: Determination by hot filtration*， 2009-02-01 Update
• ISO 10307-2 Petroleum products - Total sediment in residual fuel oils - Part 2: Determination using standard procedures for ageing; Technical Corrigendum 1*， 2010-05-01 Update
• ISO 10370 Petroleum products - Determination of carbon residue - Micro method*， 2014-11-01 Update
• ISO 10478:1994 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
• ISO 13757:1996 Liquefied petroleum gases - Determination of oily residues - High-temperature method
• ISO 14597:1997 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry
• ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test
• ISO 2719:2002 Determination of flash point - Pensky-Martens closed cup method
• ISO 3007:1999 Petroleum products and crude petroleum - Determination of vapour pressure - Reid method
• ISO 3015:1992 Petroleum products; determination of cloud point
• ISO 3016:1994 Petroleum products - Determination of pour point
• ISO 3104:1994 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
• ISO 3105:1994 Glass capillary kinematic viscometers - Specifications and operating instructions
• ISO 3405:2000 Petroleum products - Determination of distillation characteristics at atmospheric pressure
• ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
• ISO 3733:1999 Petroleum products and bituminous materials - Determination of water - Distillation method
• ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method
• ISO 3830:1993 Petroleum products; determination of lead content of gasoline; iodine monochloride method
• ISO 3837:1993 Liquid petroleum products; determination of hydrocarbon types; fluorescent indicator adsorption method
• ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons; Determination of density or relative density; Pressure hydrometer method
• ISO 4256:1996 Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method
• ISO 4260:1987 Petroleum products and hydrocarbons; Determination of sulfur content; Wickbold combustion method
• ISO 4262:1993 Petroleum products; determination of carbon residue; Ramsbottom method
• ISO 4264:2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation
• ISO 5163:2005 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
• ISO 5164:2005 Petroleum products - Determination of knock characteristics of motor fuels - Research method
• ISO 5165:1998 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method
• ISO 6245:2001 Petroleum products - Determination of ash
• ISO 6246:1995 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method
• ISO 6326-5:1989 Natural gas; determination of sulfur compounds; part 5: Lingener combustion method
• ISO 6615:1993 Petroleum products; determination of carbon residue; Conradson method
• ISO 7536:1994 Petroleum products - Determination of oxidation stability of gasoline - Induction period method
• ISO 7941:1988 Commercial propane and butane; analysis by gas chromatography
• ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
• ISO 8216-1:2005 Petroleum products - Fuels (class F) classification - Part 1: Categories of marine fuels
• ISO 8217:2005 Petroleum products - Fuels (class F) - Specifications of marine fuels
• ISO 8691:1994 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing
• ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
• ISO 8973:1997 Liquefied petroleum gases - Calculation for density and vapour pressure

ISO 8178-5:2008 history

• 2021 ISO 8178-5:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
• 2015 ISO 8178-5:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
• 2008 ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
• 1997 ISO 8178-5:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels