IEC 60794-3-40:2008
Optical fibre cables - Part 3-40: Outdoor optical fibre cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers

Standard No.
IEC 60794-3-40:2008
Release Date
2008
Published By
International Electrotechnical Commission (IEC)
Status
Replace By
IEC 60794-3-40:2022
Latest
IEC 60794-3-40:2022
Replace
IEC 86A/1228/FDIS:2008
Scope
This part of IEC 60794 is a family specification that covers sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers, also applicable for man-accessible and lateral ones. Systems built with components covered by this standard are subject to the requirements of sectional specification IEC 60794-3. Sewer cable and conduit constructions have to meet the different requirements of the sewer operating companies and/or associations regarding chemical, environmental, operational, cleaning and in general maintenance conditions. Preferential applications, describing sewer cable characteristics versus methods of installation is reported in Annex A and Annex B for non-man accessible sewers. Clause 4 describes a blank detail specification for sewer cables and conduits for installation by blowing and/or pulling in storm and sanitary sewers. It incorporates some minimum requirements. Detail specifications may be prepared on the basis of this family specification. The parameters specified in this standard may be affected by measurement uncertainty arising either from measurement errors or calibration errors due to lack of suitable standards. Acceptance criteria should be interpreted with respect to this consideration. The number of fibres tested is representative of the sewer cable and should be agreed between the customer and the supplier.

IEC 60794-3-40:2008 Referenced Document

  • IEC 60304:1982 Standard colours for insulation for low-frequency cables and wires
  • IEC 60793-2 Optical fibres - Part 2: Product specifications - General*2019-11-15 Update
  • IEC 60794-1-1 Optical fibre cables - Part 1-1: Generic specification - General*2023-05-22 Update
  • IEC 60794-1-2 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance*2021-01-15 Update
  • IEC 60794-3 Optical fibre cables - Part 3: Outdoor cables - Sectional specification*2022-02-17 Update
  • IEC 60811-1-1:1993 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 1: measurement of thickness and overall dimensions; tests for determining the mechanical properties
  • IEC 60811-5-1:1990 Common test methods for insulating and sheathing materials of electric cables; part 5: methods specific to filling compounds; section one: drop point; separation of oil; lower temperature brittleness; total acid number; absence of corrosive components; pe

IEC 60794-3-40:2008 history

  • 2022 IEC 60794-3-40:2022 Optical fibre cables - Part 3-40: Outdoor cables - Family specification for cables for storm and sanitary sewers
  • 2008 IEC 60794-3-40:2008 Optical fibre cables - Part 3-40: Outdoor optical fibre cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers

IEC 60794-3-40:2008 -All Parts




Copyright ©2024 All Rights Reserved