BS ISO 13041-1:2004
Test conditions for numeriaclly controlled turning machines and turning centres - Geometric tests for machines with a horizontal workholding spindle

Standard No.
BS ISO 13041-1:2004
Release Date
2004
Published By
British Standards Institution (BSI)
Status
 2020-11
Replace By
BS ISO 13041-1:2020
Latest
BS ISO 13041-1:2020
Replace
97/718215 DC:1997
Scope
This part of ISO 13041 specifies, with reference to ISO 230-1, the geometric tests on numerically controlled (NC) turning machines and turning centres, of normal accuracy, with horizontal work spindle(s) as defined in 3.1 and 3.2. This part of ISO 13041 specifies the applicable tolerances corresponding to the tests mentioned above. This part of ISO 13041 explains different concepts or configurations and common features of NC turning machines and turning centres. It also provides a terminology and designation of controlled axes (see Figure 1 and Table 1). This part of ISO 13041 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

BS ISO 13041-1:2004 history

  • 2020 BS ISO 13041-1:2020 Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with horizontal workholding spindle(s)
  • 2004 BS ISO 13041-1:2004 Test conditions for numeriaclly controlled turning machines and turning centres - Geometric tests for machines with a horizontal workholding spindle



Copyright ©2024 All Rights Reserved