DIN EN ISO 10846-1:2008
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008); English version of DIN EN ISO 10846-1:2008-11

Standard No.

DIN EN ISO 10846-1:2008

Release Date

2008

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 10846-1:2008-11

Latest

DIN EN ISO 10846-1:2008-11

Replace

DIN EN ISO 10846-1:1999 DIN EN ISO 10846-1:2006

Scope

This part of ISO 10846 explains the principles underlying ISO 10846 2, ISO 10846-3, ISO 10846-4 and ISO 10846-5 for determining the transfer properties of resilient elements from laboratory measurements and provides assistance in the selection of the appropriate part of this series. It is applicable to resilient elements that are used to reduce a) the transmission of audio frequency vibrations (structure-borne sound, 28 Hz to 20 kHz) to a structure which may, for example, radiate fluid-borne sound (airborne, waterborne, or other), and b) the transmission of low-frequency vibrations (typically 1 Hz to 80 Hz), which may, for example, act upon human subjects or cause damage to structures of any size when the vibration is too severe. The data obtained with the measurement methods, which are outlined in this part of ISO 10846 and further detailed in ISO 10846-2, ISO 10846-3, ISO 10846-4 and ISO 10846-5, can be used for -- product information provided by manufacturers and suppliers, -- information during product development, quality controL, and -- calculation of the transfer of vibrations through resilient elements. The conditions for the validity of the measurement methods are a) linearity of the vibrational behaviour of the resilient elements (this includes elastic elements with non-linear static load-deflection characteristics, as long as the elements show approximate linearity for vibrational behaviour for a given static preload), and b) the contact interfaces of the vibration isolator with the adjacent source and receiver structures can be considered as point contacts.

DIN EN ISO 10846-1:2008 Referenced Document

• ISO 2041 Mechanical vibration, shock and condition monitoring - Vocabulary*， 2018-10-01 Update
• ISO/IEC Guide 98-3 Uncertainty of measurement - Guide to the expression of uncertainty in measurement (GUM:1995). Extension to any number of output quantities*， 2011-11-09 Update

DIN EN ISO 10846-1:2008 history

• 2008 DIN EN ISO 10846-1:2008-11 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008); German version EN ISO 10846-1:2008
• 2008 DIN EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008); English version of DIN EN ISO 10846-1:2008-11
• 1970 DIN EN ISO 10846-1:1999 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines