The test method is useful for the following:
Classification of Powders8212;The cohesion and angle of internal friction are flowability indicators of powders and can be used to classify the powders.
Quality Control8212;For a number of industrial applications flowability factors are used to compare the material flowability at different times during production. The material produced has to be held within given limits for each application and each powder so as to ensure trouble-free operation.
Material Engineering8212;Powder properties are influenced by particle size, particle size distribution, fat content, humidity and other parameters. By selecting the correct parameters and the correct mixtures of powders, the required mechanical properties of the product are achieved.
Design of Handling Equipment8212;For certain storage and conveyor equipment mathematical models exist which require the mechanical properties of powders.
Note 28212;The quality of the result produced by this standard is dependent on the competence of personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740
1.1 This test method is applied to the measurement of the mechanical properties of powders as a function of normal stress.
1.2 This apparatus is suitable measuring the properties of powders and other bulk solids, up to a particle size of 5000 micron.
1.3 This method comprises four different test procedures for the determination of powder mechanical properties:
1.3.1 Test A8212;Measurement of INTERNAL FRICTION as a function of normal stress.
1.3.2 Test B8212;Measurement of WALL FRICTION as a function of normal stress.
1.3.3 Test C8212;Measurement of BULK DENSITY as a function of normal stress and time.
1.3.4 Test D8212;Measurement of DEGRADATION as a function of normal stress.
1.4 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D 6026
1.4.1 The procedures used to specify how data are collected/recorded or calculated in this standard are regarded as the industry standard. In addition, they are representative of the significant digits that generally should be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user’s o......
Copyright ©2024 All Rights Reserved