ASTM C966-98(2008)
Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

Standard No.
ASTM C966-98(2008)
Release Date
1998
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM C966-98(2014)
Latest
ASTM C966-98(2014)
Scope

This guide is not intended to supply design information nor to assume the responsibility of the engineer in establishing procedures to attain satisfactory performance best suited to individual job conditions. A review of this guide is recommended prior to supplementing it, as appropriate, with the conditions and requirements of the owner and engineer.

1.1 This guide covers the methods of installing asbestos-cement (A-C) nonpressure sewer and storm drain pipe and fittings covered by Specification C 428 and Specification C 663 to utilize the material''s performance properties to the fullest advantage. Included are recommendations and directives for storing, handling, and transporting pipe, trench excavation, pipe embedment, recommended work practices, assembly and installation, backfill placement, and field testing of installed pipe and fittings in pipelines.

1.2 The values stated in SI units are to be regarded as standard. The values stated in parentheses are provided for information only.

1.3 Warning8212;Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysotile asbestos, refer to Safe Use of Chrysotile: A Manual on Preventive and Control Measures.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ^REFERENCE:

This guide references the following documents. They form a part of this guide to the extent specified herein. In any case of conflict, the directives of this guide shall prevail.

ASTM Standards:

C 428 Specification for Asbestos-Cement Nonpressure Sewer Pipe

C 663 Specification for Asbestos-Cement Storm Drain Pipe

D 1869 Specification for Rubber Rings for Asbestos-Cement Pipe

D 2946 Terminology for Asbestos and Asbestosx02013;Cement Products

ANSI Standard:

C 111 Rubber Gasket Joints for Cast Iron and Ductile Iron Pipe and Fittings

Other Standards:

AASHTO T-99: Method of Test for Moisture-Density Relationships for Soils

AWWA M-16: Work Practice for Asbestos-Cement Pipe

AWWA A21.11: Rubber Gasket Joints for Cast Iron and Ductile Iron, Pipe, and Fittings

OSHA: Construction Standards and Regulations, U.S. Dept. of Labor, Occupational Safety and Health Administration

WPCF FD-5 Manual Practice No. 60 ASCE Manuals and Reports on Engineering Practice

Method T-99 Compaction and Density of Soils

^KEYWORDS: asbestos; asbestos-cement; installing; nonpressure; pipe; storm drain ^INDEX TERMS: Asbestos-cement pipe; Nonpressure piping; Sewer pipe (asbestos-cement); Trenches; Underground installation ^STATUS: Dn Cn Sn Nn Mn ^APPROVAL: 20080501 ^PAGES: 7 ^COMMITTEE: C17 ^SUBCOMMITTEE: 0300 ^BOS: 04.05 ^ORGINFO: DOD ^ACTION: REAPPROVESTD ^MISCPUB: ^PDESIG: C0966 ^PYEAR: 1998R2008 ^CLASS: Guide

ASTM C966-98(2008) history

  • 1998 ASTM C966-98(2014) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
  • 1998 ASTM C966-98(2008) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
  • 1998 ASTM C966-98(2003)e1 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
  • 1998 ASTM C966-98(2003) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
  • 1998 ASTM C966-98 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe



Copyright ©2024 All Rights Reserved