ASTM F2623-08
Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
- Standard No.
- ASTM F2623-08
- Release Date
- 2008
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM F2623-14
- Latest
- ASTM F2623-24e1
- Scope
1.1 This specification establishes requirements for polyethylene of raised temperature (PE-RT) SDR 9 tubing that is outside diameter controlled, and pressure rated for water at 73°F (23°C), 140°F (60°C) and 180°F (82.2°C). Included are requirements for material, workmanship, dimensions and tolerances, product tests, and markings for PE-RT tubing.
1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 The tubing produced under this specification shall be permitted for use in general fluid transport, including hydronics and irrigations systems.
1.5 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F2623-08 Referenced Document
- ASTM D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
- ASTM D1599 Standard Test Method for Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
- ASTM D1600 Standard Terminology for Abbreviated Terms Relating to Plastics
- ASTM D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
- ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials*， 2024-04-19 Update
- ASTM D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D618 Standard Practice for Conditioning Plastics for Testing
- ASTM F412 Standard Terminology Relating to Plastic Piping Systems
ASTM F2623-08 history
- 2024 ASTM F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- 2024 ASTM F2623-24 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- 2023 ASTM F2623-23 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- 2022 ASTM F2623-22 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- 2019 ASTM F2623-19 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
- 2014 ASTM F2623-14 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
- 2008 ASTM F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
- 2007 ASTM F2623-07 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
