SAE AS1790H-2008
Nut, Fitting, Retained, Lightweight
Home
SAE AS1790H-2008
Standard No.
SAE AS1790H-2008
Release Date
2008
Published By
Society of Automotive Engineers (SAE)
Status
Be replaced
Replace By
SAE AS1790H-2015
Latest
SAE AS1790H-2015
Scope
Nut, Fitting, Retained, Lightweight
SAE AS1790H-2008 Referenced Document
SAE AMS-QQ-A-225/9-1997
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold finished
SAE AMS-QQ-P-35-1998
Passivation Treatments for Corrosion-Resistant Steel
SAE AMS2472F-2007
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coating
SAE AMS2486D-2004
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488D-2000
(R) Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS2759/3D-2005
Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS4124D-2005
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075
SAE AMS4928R-2007
Titanium Alloy Bars@ Wire@ Forgings@ Rings@ and Drawn Shapes 6Al - 4V Annealed (UNS R56400)
SAE AMS4967J-2006
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable UNS R56400
*
,
2024-04-19 Update
SAE AS1790H-2008 history
2015
SAE AS1790H-2015
NUT, FITTING, RETAINED, LIGHTWEIGHT
2008
SAE AS1790H-2008
Nut, Fitting, Retained, Lightweight
2005
SAE AS1790G-2005
NUT, FITTING, RETAINED, LIGHTWEIGHT
1999
SAE AS1790G-1999
Nut, Fitting, Retained, Lightweight
1995
SAE AS1790F-1995
NUT, RETAINED, LIGHTWEIGHT
1994
SAE AS1790E-1994
NUT, RETAINED, LIGHTWEIGHT
1993
SAE AS1790D-1993
NUT, RETAINED, LIGHT WEIGHT
1986
SAE AS1790C-1986
NUT - SWIVEL WIRED ON, LIGHTWEIGHT
1985
SAE AS1790B-1985
NUT - SWIVEL WIRED ON, LIGHTWEIGHT
1984
SAE AS1790A-1984
NUT - SWIVEL WIRED ON, LIGHTWEIGHT
1983
SAE AS1790-1983
NUT - SWIVEL WIRED ON, LIGHTWEIGHT
Copyright ©2024 All Rights Reserved