This British Standard specifies requirements for construction and describes methods of test for armoured
cable with thermosetting insulation of rated voltages 600/1 000 V and 1 900/3 300 V. Cables specified in
this standard are intended for use in fixed installations in industrial areas, buildings and similar
applications.
The insulation and other components are suitable to permit operation of the cables at a maximum
sustained conductor temperature of 90 °C and for a maximum short-circuit conductor temperature
of 250 °C.
NOTE 1 Limitation on the temperature of the cables may be imposed in situations where they may be touched.
NOTE 2 Due to the relatively high conductor temperature, there is a risk of drying out the surrounding soil, causing an increase in
thermal resistivity, which in turn would lead to the cable temperature rising to a higher value than anticipated. For cable laid directly
in the ground, a suitable de-rating factor should be applied or a lower maximum sustained conductor operating temperature assumed
to take into account the possible effects of soil drying out.
NOTE 3 In installations which include cable joints and terminations, the performance of these accessories should be taken into
account in deciding the maximum operating temperature of the cable.
Cables specified in this standard are:
single-core stranded copper conductor;
single-core solid aluminium conductor;
two-, three-, four- and five-core stranded copper conductor;
two-, three-, and four-core solid aluminium conductor;
multicore auxiliary stranded copper conductor.
b) 1 900/3 300 V cables, wire armoured and oversheathed, having:
single-core stranded copper conductor;
single-core solid aluminium conductor;
three-core stranded copper conductor;
three-core solid aluminium conductor.
Annex A gives recommendations for the selection and operation of cables while recommendations for the
installation of cables are given in Annex B. Annex C lists the information that should be given with an
enquiry or order.
BS 5467:1997+A3:2008 Referenced Document
BS EN 10244-2 Steel wire and wire products — Non - ferrous metallic coatings on steel wire Part 2 : Zinc or zinc alloy coatings
BS EN 60332-1-2 Tests on electric and optical fibre cables under fire conditions-Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame*, 2015-11-30 Update
BS 5467:1997+A3:2008 history
2016BS 5467:2016 Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification
1997BS 5467:1997+A3:2008 Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
1997BS 5467:1997 Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V