GB/T 17587.5-2008
Ball screws.Part 5: Static and dynamic load ratings and operational life (English Version)
- Standard No.
- GB/T 17587.5-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 17587.5-2008
- Scope
- This part of GB/T 17587 specifies the calculation method for the axial rated static load, dynamic load and life of the ball screw pair, and the calculation results can be used as the basis for the design and selection of the ball screw pair. This part is applicable under the following prerequisites: ——The ball and the raceway are elastically deformed; ——The hardness of the raceway is greater than 58HRC; ——frs and fm are greater than 0.5; ——Ball screw The steel used for the pair is bearing steel or other similar alloy steel; —— Appropriate lubrication is used.
GB/T 17587.5-2008 Referenced Document
- GB/T 17587.1 Ball screws—Part 1: Vocabulary and designation*， 2017-09-29 Update
GB/T 17587.5-2008 history
- 2008 GB/T 17587.5-2008 Ball screws.Part 5: Static and dynamic load ratings and operational life
GB/T 17587.5-2008 -All Parts
GB/T 17587.1-2017 Ball screws—Part 1: Vocabulary and designation
GB/T 17587.2-1998 Ball screws--Part 2: Nominal diameters and nominal leads--Metric series
GB/T 17587.3-2017 Ball screws—Part 3:Acceptance conditions and acceptance tests
GB/T 17587.4-2008 Ball screws.Part 4:Static axial rigidity
GB/T 17587.5-2008 Ball screws.Part 5: Static and dynamic load ratings and operational life