This standard specifies the specifications, packaging, marking, storage and transportation of concentrated natural rubber latex produced by centrifugation and creaming methods preserved in whole or in part with ammonia. This standard applies to the concentrated natural rubber latex produced by the centrifugation or creaming method of the following Hevea brasiliensis latex: High ammonia concentrated natural rubber latex, centrifuged concentrated latex preserved only with ammonia after concentration, with an alkalinity (calculated as latex) of at least 0.6% (mass fraction ); Concentrated natural rubber latex with low amine, centrifuged concentrated latex preserved with ammonia and other preservatives after concentration, the alkalinity (based on latex) is not more than 0.29% (mass fraction); Concentrated natural rubber latex with medium ammonia, concentrated with ammonia and other preservatives Centrifugal concentrated latex preserved in a preservative, with an alkalinity (calculated as latex) of at least 0.30% (mass fraction); high-ammonia creamed concentrated natural latex, after concentration, creamed concentrated latex preserved only with ammonia, with an alkalinity (calculated as latex) ) is at least 0.55% (mass fraction); low-ammonia creamed concentrated natural latex, the creamed concentrated latex preserved with ammonia and other preservatives after concentration, the alkalinity (based on latex) shall not exceed 0.35% (mass fraction).