ASTM E351-93(2006)
Standard Test Methods for Chemical Analysis of Cast Iron-All Types
- Standard No.
- ASTM E351-93(2006)
- Release Date
- 1993
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM E351-13
- Latest
- ASTM E351-18
- Scope
These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of ASTM Committee A04 on Iron Castings. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E 882
. 1.1 These test methods cover the chemical analysis of pig iron, gray cast iron (including alloy and austenitic), white cast iron, malleable cast iron, and ductile (nodular) iron having chemical compositions within the following limits:
1.2 The test methods in this standard are contained in the sections indicated below:
1.3 Procedures for the determination of several elements not included in these test methods can be found in Test Methods E 30 and Test Methods E 1019.
1.4 Some of the concentration ranges given in are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.
1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E 380 are also used.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Specific hazards statements are given in Section and in special "Warning" paragraphs throughout these Methods. 1.6 This test method covers the determination of manganese in concentrations from 0.10 to 2.00 %.
1.7 This method covers the determination of phosphorus in concentrations from 0.02 to 0.90 %.
ASTM E351-93(2006) Referenced Document
- ASTM D1193 Standard Specification for Reagent Water*， 1999-04-19 Update
- ASTM E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys*， 2024-04-19 Update
- ASTM E1024 Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry (Withdrawn 2004)*， 2017-08-16 Update
- ASTM E173
- ASTM E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition*， 2006-11-01 Update
- ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E30
- ASTM E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron*， 1995-04-19 Update
- ASTM E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
- ASTM E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
- ASTM E380 Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System)
- ASTM E50 Standard Practice for Apparatus, Reagents, and safety Precautions for Chemical Analysis of Metals
- ASTM E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry*， 1998-04-19 Update
- ASTM E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ISO 5725 Precision of test methods; Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ASTM E351-93(2006) history
- 2018 ASTM E351-18 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
- 2013 ASTM E351-13 Standard Test Methods for Chemical Analysis of Cast Ironmdash;All Types
- 1993 ASTM E351-93(2006) Standard Test Methods for Chemical Analysis of Cast Iron-All Types
- 1993 ASTM E351-93(2000)e1 Standard Test Methods for Chemical Analysis of Cast Iron--All Types
