ASTM C1299-03
Standard Guide for Use in Selection of Liquid-Applied Sealants

Standard No.

ASTM C1299-03

Release Date

2003

Published By

American Society for Testing and Materials (ASTM)

Status

Withdraw 2012-11

Latest

ASTM C1299-03

Scope

1.1 This guide covers general background information for the comparative evaluation and selection of liquid-applied sealants for use in building construction.

1.2 The information contained herein has been submitted by ASTM Committee C-24 members but not verified independently by them.

1.3 This guide is not intended for use as a specification for sealants.

1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 The committee having jurisdiction for this specification is not aware of any similar ISO standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM C1299-03 Referenced Document

• ASTM C1085 Specification for Butyl Rubber Based Solvent-Release Sealants (Withdrawn 1997)
• ASTM C1183 Standard Test Method for Extrusion Rate of Elastomeric Sealants
• ASTM C1184 Standard Specification for Structural Silicone Sealants
• ASTM C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
• ASTM C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
• ASTM C570 Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction
• ASTM C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
• ASTM C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
• ASTM C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
• ASTM C669 Standard Specification for Glazing Compounds for Back Bedding and Face Glazing of Metal Sash
• ASTM C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants
• ASTM C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
• ASTM C717 Standard Terminology of Building Seals and Sealants
• ASTM C718 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
• ASTM C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
• ASTM C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
• ASTM C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
• ASTM C733 
• ASTM C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
• ASTM C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
• ASTM C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
• ASTM C793 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
• ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
• ASTM C834 Standard Specification for Latex Sealing Compounds
• ASTM C920 Standard Specification for Elastomeric Joint Sealants
• ASTM D2203 Standard Test Method for Staining from Sealants
• ASTM D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
• ASTM D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
• ASTM D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

ASTM C1299-03 history

• 2003 ASTM C1299-03 Standard Guide for Use in Selection of Liquid-Applied Sealants
• 1999 ASTM C1299-99 Standard Guide for Use in Selection of Liquid-Applied Sealants