ASTM D6892-03
Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

Standard No.

ASTM D6892-03

Release Date

2003

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D6892-03(2008)

Latest

ASTM D6892-03(2020)

Scope

The pour point of a petroleum product is an index of the lowest temperature of its utility for certain applications. Flow characteristics, such as pour point, can be critical for the correct operation of lubricating systems, fuel systems, and pipeline operations.

Petroleum blending operations require precise measurement of the pour point.

Test results from this test method can be determined at either 1 or 3°C intervals.

This test method yields a pour point in a format similar to Test Method D 97 or IP 15, when the 3°C interval results are reported.

Note 28212;Since some users may wish to report their results in a format similar to Test Method D 97 or IP 15 (in 3°C intervals) the precision data were derived for the 3°C intervals. For statements on bias relative to Test Method D 97 or IP 15, see the research report.

This test method has comparable repeatability and better reproducibility relative to Test Method D 97 or IP 15 as measured in the 1998 interlaboratory program.⁵

FIG. 1 Schematic of Cooling/Heating Block and Cooling Circulating Bath

1.1 This test method covers the determination of the pour point of petroleum products by an automatic instrument that tilts the test jar to detect movement of the surface of the test specimen with an optical device, after being removed from a regulated, stepped-bath cooling jacket.

1.2 This test method is designed to cover the range of temperatures from -57 to +51176lC; however, the range of temperatures included in the 1998 interlaboratory test program only covered the temperature range from -51 to -11176;C.

1.3 Test results from this test method can be determined at either 1 or 3176;C testing intervals.

1.4 This test method is not intended for use with crude oils.

Note 18212;The applicability of this test method on residual fuel samples has not been verified. For further information on the applicability, refer to 1.4.

1.5 The values stated in SI units are regarded as standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D6892-03 history

• 2020 ASTM D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
• 2003 ASTM D6892-03(2014) Standard Test Method for Pour Point of Petroleum Products 40;Robotic Tilt Method41;
• 2008 ASTM D6892-03(2008) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
• 2003 ASTM D6892-03 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)