ASTM D6151-97(2003)
Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
- Standard No.
- ASTM D6151-97(2003)
- Release Date
- 1997
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D6151-08
- Latest
- ASTM D6151/D6151M-15
- Scope
1.1 This practice covers how to obtain soil samples using hollow-stem sampling systems and use of hollow-stem auger drilling methods for geotechnical exploration. This practice addresses how to obtain soil samples suitable for engineering properties testing.
1.2 In most geotechnical explorations, hollow-stem auger drilling is combined with other sampling methods. Split barrel penetration tests (Test Method D 1586) are often performed to provide estimates of engineering properties of soils. Thin-wall tube (Practice D 1587) and ring-lined barrel samples (Practice D 3550) are also frequently taken. This practice discusses hole preparation for these sampling events. For information on the sampling process, consult the related standards. Other in situ tests, such as the vane shear Test Method D 2573, can be performed below the base of the boring by access through the drill string.
1.3 This practice does not include considerations for geoenvironmental site characterizations and installation of monitoring wells which are addressed in Guide D 5784.
1.4 This practice may not reflect all aspects of operations. It offers guidance on current practice but does not recommend a specific course of action. It should not be used as the sole criterion or basis of comparison, and does not replace or relieve professional judgment.
1.5 Hollow-stem auger drilling for geotechnical exploration often involves safety planning, administration, and documentation. This standard does not purport to specifically address exploration and site safety. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use. Performance of the test usually involves use of a drill rig, therefore, safety requirements as outlined in applicable safety standards, for example OSHA (Occupational Health and Safety Administration) regulations, DCDMA safety manual, drilling safety manuals, and other applicable state and local regulations must be observed.
ASTM D6151-97(2003) Referenced Document
- ASTM D1452 Standard Practice for Soil Investigation and Sampling by Auger Borings*， 2000-01-01 Update
- ASTM D1586 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils*， 1999-04-19 Update
- ASTM D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes*， 2024-04-19 Update
- ASTM D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation*， 1999-04-19 Update
- ASTM D2488 Recommended Practice for Description Of Soils (Visual-Manual Procedure)
- ASTM D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil
- ASTM D3441 Standard Test Method for Mechanical Cone Penetration Tests of Soil*， 1998-04-19 Update
- ASTM D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
- ASTM D420 Standard Guide to Site Characterization for Engineering Design and Construction Purposes *， 1998-04-19 Update
- ASTM D4220 Standard Practices for Preserving and Transporting Soil Samples
- ASTM D4428/D4428M Standard Test Methods for Crosshole Seismic Testing*， 2024-04-19 Update
- ASTM D4700 Standard Guide for Soil Sampling from the Vadose Zone
- ASTM D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils*， 2020-01-01 Update
- ASTM D4750 Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
- ASTM D5079 Standard Practices for Preserving and Transporting Rock Core Samples*， 2002-01-10 Update
- ASTM D5092 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
- ASTM D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
- ASTM D5784 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
- ASTM D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
- ASTM D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D6151-97(2003) history
- 2015 ASTM D6151/D6151M-15 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
- 2008 ASTM D6151-08 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
- 1997 ASTM D6151-97(2003) Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
- 1997 ASTM D6151-97 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
