ASTM D2336-99
Standard Guide for Specifying Factory Applied Wood Coatings

Standard No.

ASTM D2336-99

Release Date

1999

Published By

American Society for Testing and Materials (ASTM)

Status

Withdraw 2008-02

Latest

ASTM D2336-99

Scope

1.1 This practice summarizes the test methods that may be used to assist in quality control during application and in specifying pigmented coatings that shall be used in factory finishing of wood products.

1.2 This practice is not intended for use by the consumer of coated wood products in specifying such coated wood products.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D2336-99 Referenced Document

• ASTM D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers*， 2020-06-01 Update
• ASTM D1186 Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
• ASTM D1200 Standard Test Method for Viscosity by Ford Viscosity Cup
• ASTM D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
• ASTM D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings*， 2020-06-01 Update
• ASTM D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
• ASTM D1310 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
• ASTM D1400 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
• ASTM D1474 Standard Test Methods for Indentation Hardness of Organic Coatings*， 2008-07-01 Update
• ASTM D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products*， 2012-11-01 Update
• ASTM D154 Standard Guide for Testing Varnishes
• ASTM D1644 Standard Test Methods for Nonvolatile Content of Varnishes
• ASTM D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
• ASTM D2065 Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
• ASTM D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
• ASTM D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
• ASTM D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
• ASTM D2244 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
• ASTM D2793 Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates*， 2024-02-01 Update
• ASTM D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)*， 2024-01-25 Update
• ASTM D2801 Method of Test for Leveling Characteristics of Paints by Draw-Down Method
• ASTM D2805 Standard Test Method for Hiding Power of Paints by Reflectometry
• ASTM D2830 Standard Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products
• ASTM D3023 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents*， 2024-02-01 Update
• ASTM D3259 Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
• ASTM D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
• ASTM D3359 Standard Test Methods for Measuring Adhesion by Tape Test
• ASTM D3363 Standard Test Method for Film Hardness by Pencil Test*， 2022-06-01 Update
• ASTM D3934 Standard Test Method for Flash/No Flash Test-Equilibrium Method by a Closed-Cup Apparatus
• ASTM D3941 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
• ASTM D3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
• ASTM D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser*， 2001-12-10 Update
• ASTM D4206 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus*， 2018-06-01 Update
• ASTM D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
• ASTM D4287 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
• ASTM D4366 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
• ASTM D4518 Standard Test Methods for Measuring Static Friction of Coating Surfaces
• ASTM D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
• ASTM D5178 Standard Test Method for Mar Resistance of Organic Coatings
• ASTM D523 Standard Test Method for Specular Gloss
• ASTM D5235 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
• ASTM D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer-Type Viscometer
• ASTM D5722 Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
• ASTM D5795 Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via
  x201C;Cobb Ringx201D; Apparatus
• ASTM D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings*， 2008-07-01 Update
• ASTM D869 Standard Test Method for Evaluating Degree of Settling of Paint*， 2015-06-01 Update
• ASTM D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

ASTM D2336-99 history

• 1999 ASTM D2336-99 Standard Guide for Specifying Factory Applied Wood Coatings