ASME B16.44-2002
Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5 PSI

Standard No.
ASME B16.44-2002
Release Date
2002
Published By
American Society of Mechanical Engineers (ASME)
Status
Replace By
ASME B16.44-2012
Latest
ASME B16.44-2023
Scope
This Standard applies to new valve construction and covers quarter turn manually operated metallic valves in sizes NPS 4 1/4 and tubing sizes 1 1/4 O.D. These valves are intended for indoor installation as gas shutoff valves when installed in aboveground fuel gas piping downstream of the gas meter outlet and upstream of the inlet connection to a gas appliance. The valves covered by this Standard are intended for service at temperatures between 32 degrees F (0 degrees C) and 125 degrees F (52 degrees C) at pressure ratings not to exceed 5 psi (0.34 bar). When so designated by the manufacturer, these valves may be installed for service outdoors and/or at temperatures below 32 degrees F (0 degrees C) and/or above 125 degrees F (52 degrees C).

ASME B16.44-2002 history

  • 1970 ASME B16.44-2023 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi
  • 0000 ASME B16.44-2012(R2017)
  • 2012 ASME B16.44-2012 Manually Operated Metallic Gas Values for use in Above Ground Piping Systems up to 5 psi
  • 2002 ASME B16.44-2002 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5 PSI
  • 1995 ASME B16.44-1995 Manually operated metallic gas valves for use in house piping systems

ASME B16.44-2002 -All Parts

ASME B16.1-2020 Gray Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250 ASME B16.10 INT-1992 Interpretations to B16.10-1992 Face-to-Face and End-to-End Dimensions of Valves Includes Interpretation No. 1 ASME B16.10 INTERPRETATIONS-1992 Interpretations to B16.10-1992 Face-to-Face and End-to-End Dimensions of Valves Includes Interpretation No. 1 ASME B16.10-2022 errata 2023 Face-to-Face and End-to End Dimensions of Valves ASME B16.11-2021 Forged Fittings, Socket-Welding and Threaded ASME B16.11-2016 Errata-2017 Forged Fittings@ Socket-Welding and Threaded (Includes Errata: June 2017) ASME B16.12-2019 Cast Iron Threaded Drainage Fittings ASME B16.14-2018 Ferrous Pipe Plugs@ Bushings@ and Locknuts with Pipe Threads ASME B16.15 INT-1985 Interpretations to B16.5-1985 Cast Bronze Threaded Fittings Classes 125 and 250 Includes Interpretations No. 1 ASME B16.15 INTERPRETATIONS-2011 Interpretations to B16.5-1985 Cast Bronze Threaded Fittings Classes 125 and 250 (Includes Interpretations No. 1: and interpretations through June 1, 2011) ASME B16.15-2018 Cast Copper Alloy Threaded Fittings Classes 125 and 250 ASME B16.18-2021 Cast Copper Alloy Solder Joint Pressure Fittings


Copyright ©2024 All Rights Reserved