ASTM F1077-05
Standard Guide for Selection of Committee F16 Fastener Specifications

Standard No.

ASTM F1077-05

Release Date

2005

Published By

American Society for Testing and Materials (ASTM)

Status

Withdraw 2014-01

Latest

ASTM F1077-05

Scope

1.1 This guide is intended to provide a rapid, easy to use method for identifying Committee F16 fastener specifications and their applicable marking requirements. Selection is made by product type (bolts, nuts, washers, etc.) and material (alloy steel, carbon steel, stainless steel, etc.) from as follows:

1.2 Table size limitations and the need for simplicity prohibit identifying the exact grade, type, condition, etc., for all product/material combinations. The product specification must be reviewed prior to specifying fasteners on drawings or ordering to properly and completely identify the fastener, and its available variations.

ASTM F1077-05 Referenced Document

• ASTM A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth
• ASTM A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
• ASTM A325 Standard Specification for High-Strength Bolts For Structural Steel Joints
• ASTM A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength &40;Metric&41;*， 2024-04-19 Update
• ASTM A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A394 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare*， 2024-04-19 Update
• ASTM A449 Standard Specification for Quenched And Tempered Steel Bolts And Studs
• ASTM A489 Standard Specification for Carbon Steel Eyebolts
• ASTM A490 Standard Specification for Quenched And Tempered Alloy Steel Bolts For Structural Steel Joints
• ASTM A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) *， 2024-04-19 Update
• ASTM A502 Standard Specification for Steel Structural Rivets
• ASTM A563 Standard Specification for Carbon and Alloy Steel Nuts*， 2024-04-19 Update
• ASTM A563M Standard Specification for Carbon and Alloy Steel Nuts 40;Metric41;*， 2024-04-19 Update
• ASTM A574 Standard Specification for Alloy Steel Socket-Head Cap Screws
• ASTM A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)*， 2024-04-19 Update
• ASTM C514 Standard Specification for Nails for the Application of Gypsum Board
• ASTM F1135 Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
• ASTM F1136 Standard Specification for Chromium/Zinc Corrosion Protective Coatings for Fasteners
• ASTM F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners*， 2024-04-19 Update
• ASTM F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
• ASTM F1470 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
• ASTM F1503 Standard Practice for Machine/Process Potential Study Procedure
• ASTM F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
• ASTM F1575 Standard Test Method for Determining Bending Yield Moment of Nails
• ASTM F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples*， 2024-04-19 Update
• ASTM F1789 Standard Terminology for F16 Mechanical Fasteners
• ASTM F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength*， 2024-04-19 Update
• ASTM F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
• ASTM F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))*， 2024-04-19 Update
• ASTM F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]*， 2024-04-19 Update
• ASTM F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
• ASTM F432 Standard Specification for Roof and Rock Bolts and Accessories
• ASTM F436 Standard Specification for Hardened Steel Washers
• ASTM F436M Standard Specification for Hardened Steel Washers [Metric]
• ASTM F467 Standard Specification for Nonferrous Nuts for General Use
• ASTM F467M Standard Specification for Nonferrous Nuts for General Use [Metric]
• ASTM F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
• ASTM F468M Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
• ASTM F541 Standard Specification for Alloy Steel Eyebolts
• ASTM F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
• ASTM F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
• ASTM F592 Standard Terminology of Collated and Cohered Fasteners and Their Application Tools
• ASTM F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
• ASTM F594 Standard Specification for Stainless Steel Nuts
• ASTM F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
• ASTM F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
• ASTM F680 Standard Test Methods for Nails
• ASTM F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
• ASTM F788/F788M Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
• ASTM F812/F812M Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
• ASTM F835 Standard Specification for Alloy Steel Socket Button, Low and Flat Countersunk Head Cap Screws
• ASTM F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)*， 2024-04-19 Update
• ASTM F836M Standard Specification for Style 1 Stainless Steel Metric Nuts
• ASTM F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
• ASTM F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
• ASTM F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
• ASTM F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
• ASTM F880 Standard Specification for Stainless Steel Socket-Set Screws
• ASTM F880M Standard Specification for Stainless Steel Socket Set Screws [Metric]
• ASTM F901 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
• ASTM F912 Standard Specification for Alloy Steel Socket Set Screws
• ASTM F912M Standard Specification for Alloy Steel Socket Set Screws (Metric)*， 2024-04-19 Update
• ASTM F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
• ASTM F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]

ASTM F1077-05 history

• 2005 ASTM F1077-05 Standard Guide for Selection of Committee F16 Fastener Specifications
• 1995 ASTM F1077-95a(2002) Standard Guide for Selection of Committee F16 Fastener Specifications
• 1995 ASTM F1077-95a Standard Guide for Selection of Committee F-16 Fastener Specifications