1.1 This specification covers the requirements for 23 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows:
1.1.1 Grade 18212;Unalloyed titanium,
1.1.2 Grade 28212;Unalloyed titanium,
1.1.3 Grade 38212;Unalloyed titanium,
1.1.4 Grade 78212;Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.5 Grade 98212;Titanium alloy (3 % aluminum, 2.5 % vanadium),
1.1.6 Grade 118212;Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7 Grade 128212;Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.8 Grade 138212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.9 Grade 148212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.10 Grade 158212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.11 Grade 168212;Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.12 Grade 178212;Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.13 Grade 188212;Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.14 Grade 268212;Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.15 Grade 278212;Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.16 Grade 288212;Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.17 Grade 308212;Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.18 Grade 318212;Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.19 Grade 338212;Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.20 Grade 348212;Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.21 Grade 358212;Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1.1.22 Grade 368212;Titanium alloy (45 % niobium), and
1.1.23 Grade 378212;Titanium alloy (1.5 % aluminum).
1.2 Tubing covered by this specification shall be heat treated by at least a stress relief as defined in 5.3.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Copyright ©2024 All Rights Reserved