ASTM E1433-04
Standard Guide for Selection of Standards on Environmental Acoustics

Standard No.

ASTM E1433-04

Release Date

2004

Published By

American Society for Testing and Materials (ASTM)

Status

Withdraw 2010-05

Latest

ASTM E1433-04

Scope

Each current standard under the jurisdiction of Committee E33 on Environmental Acoustics is listed, divided into sections under the jurisdiction of the various subcommittees as follows:

E33.01 on Sound Absorption

E33.02 on Open Plan Spaces

E33.03 on Sound Transmission

E33.04 on Application

E33.05 on Research

E33.06 on International Standards

E33.07 on Definitions and Editorial

E33.08 on Mechanical and Electrical System Noise

E33.09 on Community Noise

The ASTM designation, title, use, result or purpose, and a brief summary of each standard is provided. These give enough explanation about the standard to permit one to understand its application, and to differentiate one standard from another.

Note 18212;The sequence of these standards does not indicate their relative importance. The user is encouraged to carefully assess the applicability of standards to a situation and select the documents most suited to the circumstances. Comments given may assist in selecting the standard best suited to a specific need.

DESCRIPTION OF STANDARDS

Top

1.1 This guide is intended to assist acoustical consultants, architects, specifiers, and others in understanding ASTM standards in environmental acoustics, so that building specifications and other documents can accurately refer to relevant standards. The full standards are found in alphanumeric order in Volume 04.06 of the Annual Book of ASTM Standards.

1.2 The scope of Committee E33 is: "The development of standards on the characteristics and performance of materials, products, systems, and services relating to the acoustical environment and the promotion of related knowledge." Only standards under the jurisdiction of Committee E33 are included in this guide. Additional standards related to environmental acoustics may be found under the jurisdiction of other ASTM committees.

1.3 None of the discussions herein is sufficiently detailed to substitute for reading the full standard. Only a careful reading of a standard will provide a complete understanding of its function. This guide is specifically NOT to be used as a direct reference in building specifications. Only the original standard gives sufficient information to serve as a specification reference.

ASTM E1433-04 Referenced Document

• ASTM C367 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
• ASTM C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
• ASTM C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
• ASTM C522 Standard Test Method for Airflow Resistance of Acoustical Materials
• ASTM C634 Standard Terminology Relating to Building and Environmental Acoustics
• ASTM C635 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
• ASTM C636 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
• ASTM E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
• ASTM E1014 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
• ASTM E1041 Standard Guide for Measurement of Masking Sound in Open Offices (Withdrawn 2002)
• ASTM E1042 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
• ASTM E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
• ASTM E1110 Standard Classification for Determination of Articulation Class
• ASTM E1111 Standard Test Method for Measuring the Interzone Attenuation of Ceiling Systems
• ASTM E1123 Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
• ASTM E1124 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
• ASTM E1130 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
• ASTM E1179 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
• ASTM E1222 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
• ASTM E1264 Standard Classification for Acoustical Ceiling Products
• ASTM E1265 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
• ASTM E1289 Standard Specification for Reference Specimen for Sound Transmission Loss
• ASTM E1332 Standard Classification for Determination of Outdoor-Indoor Transmission Class
• ASTM E1374 Standard Guide for Open Office Acoustics and Applicable ASTM Standards
• ASTM E1375 Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers (Withdrawn 2005)
• ASTM E1376 Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels (Withdrawn 2005)
• ASTM E1408 Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems
• ASTM E1414 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum*， 2024-04-19 Update
• ASTM E1503 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
• ASTM E1573 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
• ASTM E1574 Standard Test Method for Measurement of Sound in Residential Spaces
• ASTM E1686 Standard Guide for Selection of Environmental Noise Measurements and Criteria
• ASTM E1704 Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
• ASTM E1779 Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
• ASTM E1780 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
• ASTM E2179 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors*， 2024-04-19 Update
• ASTM E2202 Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
• ASTM E336 Standard Test Method for Measurement of Airborne Sound Insulation in Buildings
• ASTM E413 Classification for Rating Sound Insulation
• ASTM E477 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
• ASTM E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
• ASTM E497 Standard Practice for Installing Sound-Isolating Lightweight Partitions
• ASTM E557 Standard Guide for The Installation of Operable Partitions
• ASTM E580 Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Requiring Seismic Restraint
• ASTM E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
• ASTM E717 Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards
• ASTM E756 Standard Test Method for Measuring Vibration-Damping Properties of Materials
• ASTM E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
• ASTM E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
• ASTM E966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
• ASTM E989 Standard Classification for Determination of Impact Insulation Class (IIC)

ASTM E1433-04 history

• 2004 ASTM E1433-04 Standard Guide for Selection of Standards on Environmental Acoustics
• 1995 ASTM E1433-95 Standard Guide for Selection of Standards on Environmental Acoustics