ASTM C1672-07
Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

Standard No.

ASTM C1672-07

Release Date

2007

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM C1672-07(2014)

Latest

ASTM C1672-23

Scope

1.1 This method describes the determination of the isotopic composition and/or the concentration of uranium and plutonium as nitrate solutions by the thermal ionization mass spectrometric (TIMS) total evaporation method. Purified uranium or plutonium nitrate solutions are loaded onto a degassed metal filament and placed in the mass spectrometer. Under computer control, ion currents are generated by heating of the filament(s). The ion beams are continually measured until the sample is exhausted. The measured ion currents are integrated over the course of the run, and normalized to a reference isotope ion current to yield isotopic ratios.

1.2 In principle, the total evaporation method should yield isotopic ratios that do not require mass bias correction. In practice, some samples may require this bias correction. When compared to the conventional TIMS method, the total evaporation method is approximately two times faster, improves precision from two to four fold, and utilizes smaller sample sizes.

1.3 The total evaporation method may lead to biases in minor isotope ratios due to peak tailing from adjacent major isotopes, depending on sample characteristics. The use of an electron multiplier equipped with an energy filter may eliminate or diminish peak tailing effects. Measurement of instrument abundance sensitivity may be used to ensure that such biases are negligible, or may be used to bias correct minor isotope ratios.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM C1672-07 Referenced Document

• ASTM C1008 Standard Specification for Sintered (Uranium-Plutonium) Dioxide
  Pellets&x2014;Fast Reactor Fuel
• ASTM C1068 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
• ASTM C1156 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
• ASTM C1168 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
• ASTM C1347 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
• ASTM C1411 Standard Practice for the Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
• ASTM C1415 Standard Test Method for ²³⁸Pu Isotopic Abundance by Alpha Spectrometry
• ASTM C753 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
• ASTM C757 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
• ASTM C776 Standard Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors
• ASTM C787 Standard Specification for Uranium Hexafluoride for Enrichment
• ASTM C833 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
• ASTM C967 Standard Specification for Uranium Ore Concentrate
• ASTM C996 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5% 235U1
• ASTM D3084 Standard Practice for Alpha-Particle Spectrometry of Water
• ASTM E137 

ASTM C1672-07 history

• 2024 ASTM C1672-23 Standard Test Method for Determination of the Uranium, Plutonium or Americium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
• 2017 ASTM C1672-17 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
• 2007 ASTM C1672-07(2014) Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
• 2007 ASTM C1672-07 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer