This standard specifies the requirements and test methods concerning, in particular, the construction, safety, fitness
for purpose, and rational use of energy, as well as the classification and marking of gas-fired central heating boilers
that are fitted with atmospheric burners, fan assisted atmospheric burners or premixed burners, and that are
hereafter referred to as "boilers".
This European Standard applies to type C boilers as listed in 4.2:
- types C1, C3 and C5 boilers including their combustion air supply and combustion products evacuation ducts and
their terminals;
- types C2 and C4 boilers including their connection ducts but without the shared duct system; this shared duct
system is part of the building;
- type C6 boilers without any ducts; these ducts are separately approved and marketed;
- type C7 boilers until the draught diverter/air-inlet but without the secondary flue;
- type C8 boilers with their connecting ducts but without the chimney, which is part of the building;
and those
- that are fitted with atmospheric burners, atmospheric burners assisted by a fan for the supply of combustion air
or evacuation of combustion products, or fully premixed burners;
- that use one or more combustible gases corresponding to the three gas families and to the pressures stated in
7.1.2.4;
- that have a nominal heat input (on net calorific value) not exceeding 70 kW;
- where the temperature of the water does not exceed 95 ~C during nornmal operation;
- where the maximum water-side operating pressure does not exceed 6 bar.
This European Standard does not contain all the requirements necessary for:
- type C41 C5l. C61, C71 and C81 boilers:
- boilers intended to be installed in the open;
- boilers of the condensing type;
- boilers of the combination type (central heating and production of domestic hot water).
This European Standard only covers type testing.
BS EN 483:1999+A4:2007 Referenced Document
EN 10029 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape*, 2024-04-19 Update
EN 1057 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications*, 2010-02-01 Update
EN 125 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices*, 2022-10-12 Update
EN 126 Multifunctional controls for gas burning appliances*, 2014-11-01 Update
EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods*, 2004-09-01 Update
EN 13501-1 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 14241-1:2005 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners*, 2005-08-01 Update
EN 1443 Chimneys - General requirements*, 2003-03-01 Update
EN 14471:2005 Chimneys - System chimneys with plastic flue liners - Requirements and test methods*, 2005-08-01 Update
EN 1561 Founding - Grey cast irons*, 2023-12-13 Update
EN 161 Automatic shut-off valves for gas burners and gas appliances*, 2022-10-12 Update
EN 1856-1:2003 Chimneys Requirements for metal chimneys Part 1: System chimney products Includes Amendment A1:05/2006*, 2003-06-01 Update
EN 1856-2 Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pip*, 2004-07-01 Update
EN 1859:2000 Chimneys - Metal Chimneys - Test Methods Incorporating Amendment A1: June 2006
EN 23166 Codes for the representation of names of countries ISO 3166: 1993
EN 24063 Welding, brazing, soldering and braze welding of metals; nomenclature of processes and reference numbers for symbolic representation on drawings (ISO 4063:1990)
EN 298 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels*, 2022-11-16 Update
EN 437 Test gases - Test pressures - Appliance categories
EN 50165 Electrical Equipment of Non-Electric Appliances for Household and Similar Purposes - Safety Requirements
EN 513 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering*, 2018-12-01 Update
EN 549 Rubber materials for seals and diaphragms for gas appliances and gas equipment*, 2023-05-03 Update
EN 60529 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
EN 60730-2-9 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls*, 2024-04-19 Update
EN 88 Pressure Governors for Gas Appliances for Inlet Pressures up to 200 mbar*, 2001-05-01 Update
BS EN 483:1999+A4:2007 history
2012BS EN 15502-2-1:2012 Gas-fired central heating boilers. Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1000 kW
1994BS EN 297:1994 Gas-fired central heating boilers. Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
1988BS 6332-1:1988 Thermal performance of domestic gas appliances - Specification for thermal performance of central heating boilers and circulators
1986BS 5258-1:1986 Safety of domestic gas appliances - Specification for central heating boilers and circulators