BS EN 12809:2001+A1:2004
Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods

Standard No.

BS EN 12809:2001+A1:2004

Release Date

2001

Published By

British Standards Institution (BSI)

Status

Be replaced 2001-01

Replace By

BS EN 12809:2001+A1:2004(2008)

Latest

BS EN 12809:2001+A1:2004(2008)

Replace

97/707247 DC-1997 BS EN 12809:2001

Scope

This European Standard specifies requirements relating to the design, manufacture, construction, performance (efficiency and emission), safety, instructions and marking together with associated test methods and test fuels for type testing residential independent boilers fired by solid fuel. This standard is applicable to hand and automatically fired appliances having nominal heat outputs up to 50 kW, the primary function of which is to provide hot water for central heating and/or domestic use, and which are designed for use only with open vented systems at a working pressure not exceeding 2 bar. In addition to their primary function of providing hot water these appliances also provide space heating to the place of installation. These appliances may burn either solid mineral fuels, peat briquettes or natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer’s instructions. This standard is not applicable to independent boilers for hot water only production and having heat outputs of less than 5 kW. This standard is also not applicable to the design and construction of automatic stoking devices.

BS EN 12809:2001+A1:2004 Referenced Document

• EN 10027-2:1992 Designation systems for steels - Part 2: Steel numbers
• EN 10028-2:1992 Flat products made of steels for pressure purposes; part 2: non-alloy and alloy steels with specified elevated temperature properties
• EN 10029:1991 Hot Rolled Steel Plates 3 mm Thick or Above - Tolerances on Dimensions, Shape and Mass
• EN 10088-2:1995 Stainless Steels - Part 2: Technical Delivery Conditions for Sheet/Plate and Strip for General Purposes
• EN 10111:1998 Continuously Hot-Rolled Low Carbon Steel Sheet and Strip for Cold Forming - Technical Delivery Conditions Ratified European Text
• EN 10120:1996 Steel Sheet and Strip for Welded Gas Cylinders
• EN 1561:1997 Founding - Grey Cast Irons
• EN 1563:1997 Founding - Spheroidal graphite cast irons Includes amendment A1: 2002; A2: July 2005
• EN 50165 Electrical Equipment of Non-Electric Appliances for Household and Similar Purposes - Safety Requirements
• ISO 228-1:1994 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
• ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit gauges
• ISO 331:1983 Coal; determination of moisture in the analysis sample; direct gravimetric method
• ISO 334:1992 Solid mineral fuels; determination of total sulfur; Eschka method
• ISO 351:1996 Solid mineral fuels - Determination of total sulfur - High temperature combustion method
• ISO 501:1981 Coal; Determination of the crucible swelling number
• ISO 562 Hard coal and coke - Determination of volatile matter*， 2010-06-01 Update
• ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges

BS EN 12809:2001+A1:2004 history

• 0000 BS EN 12809:2001+A1:2004(2008)
• 2001 BS EN 12809:2001+A1:2004 Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods
• 2001 BS EN 12809:2001 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods