This test method specifies the operating procedures for a controlled irradiance, xenon arc apparatus used for the accelerated exposure of various automotive interior trim components. This is a performance standard based on the test parameters of SAE J1885. Test duration as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers. Equipment qualified to perform this test is determined by material test comparison between instruments approved for SAE J1885 and those intending to perform SAE J2412. A specific test protocol to compare new test equipment to those previously approved must be done by material test comparison by the contractual parties. The interested contractual companies shall identify details of the test protocol and the materials to be tested. At the time of publication of this test method, the committee is developing a 'Protocol To Verify New Test Apparatus' identified as SAE J2413. Any deviations to this test method, such as filter combinations, is to be agreed upon by contractual parties.
SAE J2412-2004 Referenced Document
ASTM D4517-04 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy*， 2024-04-19 Update
ASTM D859-00 Standard Test Method for Silica in Water
ASTM G113-03 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials*， 2024-04-19 Update
ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G147-02 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests*， 2024-04-19 Update
ASTM G151-00 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources*， 2024-04-19 Update
ASTM G155-04 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials*， 2024-04-19 Update
SAE J1683-1997 MS-DOS Interface for SAE J1708 Communications
SAE J1767 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials*， 2021-01-01 Update
SAE J1767-1995 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials, Recommended Practice
SAE J1885-1992 (R) Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
SAE J2412-2004 history
2024SAE J2412-2024 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
2023SAE J2412-2023 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
0000 SAE J2412-201508
2015SAE J2412-2015 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
2004SAE J2412-2004 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
2003SAE J2412-2003 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus