DIN ISO 8133:2008
Hydraulic fluid power - Single rod cylinders, 16 MP (160 bar) compact series - Mounting dimensions for accessories (ISO 8133:2006);English version of DIN ISO 8133:2008-06

Standard No.

DIN ISO 8133:2008

Release Date

2008

Published By

German Institute for Standardization

Status

Be replaced 2017-11

Replace By

DIN ISO 8133:2017

DIN ISO 8133 E:2016

Latest

DIN ISO 8133:2024-01

Replace

DIN ISO 8133:2007

Scope

This International Standard specifies the mounting dimensions required for interchangeability of accessories for 16 MPa [160 bar 1)] compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application. This International Standard covers the following accessories, identified in accordance with ISO 6099: -- AP6: rod eye spherical, female thread (see Figure 1 and Table 1) -- AB5: clevis bracket, spherical eye, in angle (see Figure 2 and Table 2) -- AA7: pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3) -- AL7: locking plate for pivot pin (see Figure 4 and Table 4) -- AP2: rod clevis, female thread (see Figure 5 and Table 5) -- AP4: rod eye plain, female thread (see Figure 6 and Table 6) -- AB2: eye bracket (see Figure 7 and Table 7) -- AB4: clevis bracket, straight (see Figure 8 and Table 8) -- AA4: pivot pin, plain (cotter pin or snap ring type) (see Figure 9 and Table 9) -- AT4: trunnion bracket (see Figure 10 and Table 10) These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO $322. This International Standard only applies to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.

DIN ISO 8133:2008 Referenced Document

• ISO 286-2 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1*， 2013-08-01 Update
• ISO 3320 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series*， 2013-12-01 Update
• ISO 3322 Fluid power systems and components; Cylinders; Nominal pressures
• ISO 5598 Fluid power systems and components — Vocabulary*， 2020-01-06 Update
• ISO 6020-2 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series*， 2015-08-01 Update
• ISO 6099 Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types*， 2018-08-31 Update

DIN ISO 8133:2008 history

• 2024 DIN ISO 8133:2024-01 Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022)
• 2023 DIN ISO 8133:2023-03 Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022); Text in German and English / Note: Date of issue 2023-02-10*Intended as replacement for DIN ISO 8133 (2017-11).
• 2023 DIN ISO 8133:2023 Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022); Text in German and English
• 2017 DIN ISO 8133:2017-11
• 2017 DIN ISO 8133:2017 Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2014)
• 2008 DIN ISO 8133:2008 Hydraulic fluid power - Single rod cylinders, 16 MP (160 bar) compact series - Mounting dimensions for accessories (ISO 8133:2006);English version of DIN ISO 8133:2008-06
• 0000 DIN ISO 8133:2007