1.1 This European Standard covers the grades of wrought steels and alloys listed in Table 1 and Table 2,
which are usually employed for components and equipment, for which the main requirement is their creep
resistance under mechanical long-time stressing at temperatures above 500 °C.
NOTE Heat resisting grades given in EN 10095 [9] may also be used for similar applications if so agreed.
1.2 This European Standard specifies the technical delivery conditions for semi-finished products, for hot or
cold rolled sheet/plate and strip, hot or cold formed (cold drawn) bars, rods, wire and sections.
1.3 The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of
this European Standard, unless otherwise specified in this European Standard.
1.4 This European Standard does not apply to components manufactured by further processing the product
forms listed in 1.2 with quality characteristics altered as a result of such further processing.
1.5 This European Standard shall not be used for aerospace and pressure purposes.
1.6 For steels and alloys with similar chemical composition, but intended for different applications, see the
Bibliography.
BS EN 10302:2008 Referenced Document
EN 10002-1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature
EN 10002-5 Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products*, 2024-04-19 Update
EN 10027-1 Designation Systems for Steels - Part 1: Steel Names
EN 10027-2 Designation systems for steels - Part 2: Numerical system*, 2015-04-01 Update
EN 10052:1993 Vocabulary of Heat Treatment Terms for Ferrous Products
EN 10163-2 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: plate and wide flats*, 2024-04-19 Update
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10204 Metallic products - Types of inspection documents*, 2024-04-19 Update
EN 10221 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 377:1997 Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing ISO 377: 1997
BS EN 10302:2008 history
2008BS EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
2002BS EN 10302:2002 Creep resisting steels, nickel and cobalt alloys