BS 5440-1:2008 Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) – Part 1: Specification for installation of gas appliances to chimneys and for maintenance of chimneys
This part of BS 5440 specifies requirements for the installation of gas
appliances to chimneys, chimney installation work likely to be
undertaken by gas engineers and operatives working under UK gas
industry conditions and requirements for the maintenance of chimneys.
It is applicable to open flue chimneys for Type B gas appliances and
room-sealed chimney configurations for Type C gas appliances, each of
rated input not exceeding 70 kW net (see Note 2 and Note 3), burning
1st, 2nd or 3rd family gases. It applies to chimneys of the natural
draught or fanned draught type and is applicable to open flue chimneys
and room-sealed chimneys supplied with the appliance as well as to
those supplied separately.
It complements the requirements for the design, installation and
commissioning of chimneys as required in BS EN 15287-1 and
BS EN 15287-2 and requires extra details that are specific to the UK gas
industry. This is kept in perspective by quoting some details of
BS EN 15287-1 and BS EN 15287-2.
It specifies the following:
• requirements for the selection of the appropriate flueing option for
gas appliances in the UK;
• requirements for the installation of gas appliances to new
chimneys, or chimney configurations;
• requirements for the installation of gas appliances to existing
chimneys or chimney configurations;
• requirements for the installation of appliances which carry a CE
mark and for which the manufacturer’s instructions are available
to the installer;
• requirements installation of appliances which do not carry a CE
mark and used/second-hand appliances for which the
manufacturer’s instructions are available to the installer.
This part of BS 5440 is applicable to:
• complete chimney and all chimney components from the appliance
connection to the discharge point into outside air;
• the installation of gas appliances to existing chimneys that were
intended originally for appliances burning other fuels;
• chimneys for residential park homes but not to chimneys for
leisure accommodation vehicles.
This part of BS 5440 is not applicable to gas-fired incinerators. Refer to
BS 5871-3 for the installation of decorative fuel effect appliances.
This part of BS 5440 includes compatibility of appliances installed in
the UK with new chimneys designated under BS EN 1443 and with
existing chimneys, including non-designated chimneys.
BS 5440-1:2008 Referenced Document
BS 5546 Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kW net*, 2010-06-30 Update
BS 5864 Installation and maintenance of gas-fired ducted air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family gases). Specification*, 2019-02-28 Update
BS 5871-1 Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases)
BS 5871-3 Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2nd and 3rd family gases)
BS 6230 Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases)*, 2011-07-31 Update
BS 6798 Specification for selection, installation, inspection, commissioning, servicing and maintenance of gas-fired boilers of rated input not exceeding 70 kW net*, 2014-05-31 Update
BS 6896 Specification for installation and maintenance of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)*, 2011-06-30 Update
BS 7461 Specification for Electrically operated automatic gas shut - off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS EN 13384-2 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance*, 2015-01-01 Update
BS EN 1457 Chimneys - Clay/ceramic flue liners - Requirements and test methods
BS EN 161 Automatic shut-off valves for gas burners and gas appliances*, 2022-11-30 Update
BS EN 1806 Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
BS EN 1856-1 Chimneys. Requirements for metal chimneys. System chimney products*, 2010-04-30 Update
BS EN 1856-2 Chimneys. Requirements for metal chimneys. Metal flue liners and connecting flue pipes*, 2010-04-30 Update
BS EN 1858 Chimneys. Components. Concrete flue blocks*, 2010-01-31 Update
BS 5440-1:2008 history
2023BS 5440-1:2023 Chimneys, flue pipes and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) - Design, installation, commissioning and maintenance of chimneys. Specification
2008BS 5440-1:2008 Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) – Part 1: Specification for installation of gas appliances to chimneys and for maintenance of chimneys
2000BS 5440-1:2000 Installation and maintenance of flues and ventilation for gas appliances of rated heat input not exceeding 70 kW net (1st, 2nd and 3rd family gases) - Specification for installation and maintenance of flues