GB/T 17454.2-2008
Safety of machinery.Pressure-sensitive protective devices.Part 2:General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (English Version)

Standard No.

GB/T 17454.2-2008

Language

Chinese, Available in English version

Release Date

2008

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2017-12

Replace By

GB/T 17454.2-2017

Latest

GB/T 17454.2-2017

Scope

This standard specifies the general principles and requirements for the design and testing of pressure-sensitive edges and pressure-sensitive rods when used as safety devices. At this time, the pressure sensitive edge and pressure sensitive rod are not used as actuating means for normal operation. Pressure-sensitive edges and pressure-sensitive rods with or without external reset can be used to sense the human body or parts of the human body exposed to hazards such as dangerous moving parts. This part mainly describes the relationship between safety and reliability (see Appendix D in GB/T 16855.1-2005 for the relationship between safety and reliability), and does not involve the relationship between safety and suitability. This part of GB/T 17454 is limited to describing the function of the pressure-sensitive edge and pressure-sensitive rod, and does not specify the requirements for their application, but Chapter 6 contains the requirements for the use information provided by the manufacturer. Pressure-sensitive edges or pressure-sensitive rods for specific applications, the dimensions of which are not specified in this standard. This section does not apply to those stop devices (including emergency stop devices) that comply with GB 5226.1 and are only used for normal operation of machinery. Additional requirements need to be considered for the use of pressure-sensitive edges and pressure-sensitive sticks in places easily accessible by the elderly, disabled or children.

GB/T 17454.2-2008 Referenced Document

• GB 14048.5-2001 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching element Electromechanical control circuit devices
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB 5226.1-2002 Safety of machinery--Electrical equipment of machines--Part 1: General requirements
• GB 7251.1-2005 Low-voltage switchgear and controlgear assemblies-Part 1:Type-tested and partially type-tested assemblies
• GB/T 15706.1-2007 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
• GB/T 15706.2-2007 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
• GB/T 16855.1-2005 Safety of machinery.Safety-related parts of control systems.Part 1:General principles for design
• GB/T 16855.2-2007 Safety of machinery Safety-related parts of control systems Part 2: Validation
• GB/T 16935.1-1997 Insulation coordination for eguipment within low-voltage systems. Part 1: Principles, requirements and tests
• GB/T 17626.2 Electromagnetic compatibility.Testing and measurement techniques.Electrostatic discharge immunity test*， 2018-06-07 Update
• GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*， 2023-12-28 Update
• GB/T 17626.4 Electromagnetic compatibility－Testing and measurement techniques－Electrical fast transient/burst immunity test*， 2018-06-07 Update
• GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*， 2019-06-04 Update
• GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature*， 2012-12-31 Update
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state*， 2016-12-13 Update
• GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 3766 Hydraulic fluid power.General rules and safety requirements for systems and their components*， 2015-12-31 Update
• GB/T 7932 Pneumatic fluid power-General rules and safety requirements for systems and their components*， 2017-07-12 Update

GB/T 17454.2-2008 history

• 2017 GB/T 17454.2-2017 Safety of machinery—Pressure-sensitive protective devices—Part 2: General principles for design and testing of pressure-sensitive edges pressure-sensitive bars
• 2008 GB/T 17454.2-2008 Safety of machinery.Pressure-sensitive protective devices.Part 2:General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars

GB/T 17454.2-2008 -All Parts